0
Want this question answered?
Be notified when an answer is posted
Add your answer:
Earn +20 pts
What is one advantage of using a pulley system?
By using a pulley one can easily do things with less effort
How are a fixed pulley and a movablepulleydiffrent?
Using a movable pulley is known as using it to 'advantage'. The line going to the movable pulley contributes towards the force acting on the load. A line going to a fixed pulley, only serves to change the direction of the force.
When you raise or lower a flag on a flagpole you are using?
pulley
What is the pulley?
A pulley is a simple machine that helps you carry heavy objects without using a large amount of force.
What is a surface that redirects force using a rope?
doggie
Does a pulley that goes around a motor come off?
That depends on how the pulley is mounted on the motor. If the pulley is welded then no most likely you will have to cut it to get it off. However, if the pulley is fixed to the motor using a bolt/s or other fasteners then yes. Warning: The pulley could be press fit onto the motor. If this is the case it can come off but might not be able to ever go back on.
What is the trade off between mechanical advantage and the distance within pulley systems?
Mechanical advantage: you can use some method (eg, lever or pulley wheels) to move an object which otherwise would be too heavy, or jammed. The trade off is that you can't get away with using less work - the reduced force you need to apply is compensated by the fact you have to move your force throgh a proportionately larger distance.
How do you change a crankshaft pulley on 1998 Dodge Grand Caravan 3.3 L?
Disconnect the battery. Using a metric socket and a breaker bar turn the tensioner clockwise and release the belt. Using a metric socket take off the bolt in the middle of the pulley. Use a pulley puller and pull it off.
Using trade-off in a sentence?
For most products you can buy, there is a trade-off between quality and price.
Water pump 1997 Grand Prix Got one bolt to take off and it hits the Power steering pulley do you have to take this pulley off to get the water pump off Job was going good till this last bolt?
yep, you have to take the pulley off using a power steering pulley puller, easily found for rental at autozone. the part that sucks is putting the pulley back on. when you figure that out, IF you figure that out, everything else will be fine.
How do you get a pulley off a 1998 Chevy Blazer?
HOW TO GET A PULLEY OFF A 1998 CHEVY BLAZER
What is the pulley under the alternator in a 1994 Chevy caprice 5.7L and how hard is it to change?
Are you talking about the "idler pulley"? They are quite simple to change. Loosen the serpentine belt by using a socket on the center of the tensioner pulley, slide the belt off the idler pulley, use a socket to pull the center bolt of the idler pulley and replace the pulley with a new one.
What is one advantage of using a pulley system?
By using a pulley one can easily do things with less effort
What is a trade-off for using a screw?
im looking for answers also.........
What accurately describes a trade-off of using biomass as a fuel?
urnium
What is the trade off with a group of pulleys?
A pulley system is a force multiplier. That means you trade distance for force. You pull the rope a long way to lift the load a short way, but the force you need is reduced.
What is velocity ratio of a pulley?
The ratio for a simple pulley (not a pulley block), using an inelastic string, is 1.
