Want this question answered?
A processor is the logic circuitry that responds to and processes the basic instructions that drive a computer.
L2 cache. Today's processors all have some memory on the processor chip (called a die). Memory on the processor die is called Level 1 cache (L1 cache). Memory in the processor package, but not on the processor die, is called Level 2 cache (L2 cache). Some processors use a third cache farther from the processor core, but still in the processor package, which is called Level 3 cache (L3 cache).
You use an Anvil and put your tool in the left slot and put your Enchanted Book in the middle slot and as long as you are the level it requires then you should be done. (Note) this answer was submitted 1/12/2013
You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.You could use a word processor or a desktop publisher.
When we upgrade our motherboard we concentrate following important points to make changes in ouy PC 1 - First check that the Ram is Dimm or Simm (Too old memory )if it is Dimm Ram then you will have to check that this Ram is of 66 Buses , 100 Buses , or of 133. Normally P1 works 66 bus ram and P2 works 100 bus ram 2 - Then come to Processor , see wether it is Slot Processor or Socket Processor depending on the processor type you will have to get the new motherboard For example I have a PC with a Motherboard XL 2000 and I want to change my motherboard so the Ram that is installed with XL 2000 is 64 MB 100 bus and Processor is Genuine Intel 350 Mhz (Slot Type) I may get the other motherboard say Intel 810 C Chipset or GFXL (because) Both the motherboards support Ram with 100 bus and My Slot Processor 350 Mhz It would be better for you to confirm by asking before purchasing new or other motherboard that what is the final range of processor that the new motherboard will support As I change my motherboard from XL 2000 TO GFXL OR Intel 810c I will Use my own slot processor 350 Mhz that is PII Processor but I can also change My processor from 350 to 500 600 Slot processor to make my system PIII whenever I get the money.
Yes, most microwave ovens use a custom processor as a timer and power level controller.
unlock the doors and then push the button on the trunk. If the trunk lock key slot is horizontal you will need to use the key to turn it vertical. Then it will function with the central locking system
A pci-e bus will have a little catch that holds the card securely in place. your case will also have a locking mechanism at the back that holds the card in place.
Well it does depend on your NEVEC Level. If your NEVEC Level reaches 36 the handgun becomes available on the slot machine. If you use it enough after that the password for everything becomes available to use.
That is correct. I prefer using PCI E 2.0 ( usually is in the upper slot towards the processor on most motherboards.
Theoretically you can use any slot, but practically use ports starting from 1st.
word processor