the current standard I believe is 450mm from finished floor height, although there are many installations that have it at 300mm from finished floor height.
There are no hard and fast rules, the most important thing is that it is relatively local to the stove (normally directly behind it), and easily accessable when the stove is pulled out for safe connection/disconnection.
Can an apt. stove be plugged into a outlet
Yes. The outlet on the stove should be rated to 15A 110V.
The four blade dryer plug brings a separate ground wire from the machine to the electrical grounding system. The three blade dryer plug depended on the neutral wire of the plug to make this connection.
For a light switch in the home four foot to centre is a reasonable height. Some contractors set the outlet box at four foot to the bottom of the outlet box and other contractors set the box to four foot to the top of the outlet box. There is no code rule that stipulates the exact height that the outlet box must be set to.
There is no required height but normally it is best to keep them 12 inches off the groung.
Can an apt. stove be plugged into a outlet
the one ten outlet doesn't work on my stove
Most electrician use the height of an electrician's hammer to mark the bottom of an outlet box. That height is 18 inches.
Yes. The outlet on the stove should be rated to 15A 110V.
You bet it will.
Stove appliances can be bought from many different stores and retailers. Some examples of stores that sell stove appliances include Sears Outlet and Bed Bath & Beyond.
Could be the outlet, could be an open wire, could be a loose connection. First thing I would do is check that the connections are tight. Then replace the outlet. That leaves the wiring... The connection is probably corroded. Check the plug, if it's black and pitted you probably should replace both the plug and outlet.
The four blade dryer plug brings a separate ground wire from the machine to the electrical grounding system. The three blade dryer plug depended on the neutral wire of the plug to make this connection.
For a light switch in the home four foot to centre is a reasonable height. Some contractors set the outlet box at four foot to the bottom of the outlet box and other contractors set the box to four foot to the top of the outlet box. There is no code rule that stipulates the exact height that the outlet box must be set to.
You still need a circuit breaker. From your question it appears your stove is hardwired to the panel. It is perfectly acceptable to connect it to a suitably specified outlet and plug for the voltage and amperes for the stove. Basically you would turn off the breaker, install an outlet on the floor or wall so as not to interfere with stove. You can buy cords with the proper plugs and mating receptacles in most any hardware store. For an electric stove with an oven you are usually talking about a 50A breaker and the corresponding outlet and plug. This can be dangerous and if you are not sure of what you are doing an electrician is highly recommended.
As close to the floor as possible, or on the floor. Remember you want the range to sit back against the wall. So you must mount the outlet so it goes into the opening at the bottom of the stove. Otherwise when you plug it in, the plug will hit the back of the stove.
No you can not you will need to replace the plug with a 4 prong the same as the style of your oven and change your breaker to the correct Amp for your style of 4 prong plug