As much as someone is willing to psy
Yes it should be all right. Ratings for amp/speakers are approximate but as a rule it is preferable for the speaker to be rated higher than the amp.
Not unless the device is running at less than 333 volts.
assuming this is a 12 volt system....45 amps.
No, they overheat and chip out a draws too much current.
yes it can
YES! it won't reach it's peak, but that's also probably a good thing, cause it'll be harder to blow your sub. i prefer to buy either the exact watt match for my subs and amp, or buy the next lower watt amp from my subs
Yes it should be all right. Ratings for amp/speakers are approximate but as a rule it is preferable for the speaker to be rated higher than the amp.
bridge amp run 1 sub it will hit deeper and harder start adjusting with gain all the way down
You need at least 5 volts to power it? What's the real question?
well you hook it up
Not unless the device is running at less than 333 volts.
assuming this is a 12 volt system....45 amps.
The equation that you need to use is I = W/E. Amps = Watts/Volts. As you can see there is no voltage stated but when you obtain the voltage value use it in the equation.
1200 Watt wiring is more than enough for an 800 Watt amp. The rating of the sub doesn't make any difference to the cables. If you want to use the sub to its rated power you should get a bigger amp. If the amp can only give out 800 Watts and the sub can take 1100 Watts then you can put a bigger amp on. It is still going to be loud as with an 800 Watt amp. I have a 300 watt amp with a 1200 Watt sub and people hear me coming.
With 600 watts, you can't really go too big, and if you only have one amp, you can't go with separate mids/highs and a sub, so personally, I would try to find a pair of 200 watt speakers that have nice tweeters, mids, and lows, all in one. Don't go for anything over 200 watts each, because you want to leave room on your amp. You don't want to get two 300 watt speakers, because your amp will be working at full power, which isn't good for it or your new speakers. So all in all, a nice pair of 200 watt full range speakers is what I would be looking for.
Any amp will power a 15" sub. What you need to know is what is the RMS of the 15" sub. Lets say its 200 watts RMS than you will want a max of 200 watts for your amp.
No, they overheat and chip out a draws too much current.