0
What else can I help you with?
What are the three major parts of the sewing machine?
Sewing machine light,presser foor lever,threadscutter
Where is the light switch on a sewing machine?
its in the left
What does a light switch do in a sewing machine?
The light on a sewing machine helps you see what you're sewing with ease. When sewing, precision and details are essential, so being able to clearly see the needle, thread, stitches, and details are necessary.
How do you change light bulb on viking sewing machine?
have old light out of machine but can't get new blub in place
What is the light on the sewing machine used for?
The bulb on the sewing machine is simply for an extra boost of light. Because sewing involves small details - needles, thread, stitches, fine edges, etc. - a small lamp is focused on the work area to help you better see the stitching.
How does your Kenmore beginner sewing machine 11803 turn on?
It actually has no on/off switch and no light on it. You only need to plug it in and push the foot pedal to start sewing.
What is a substitute for sewing machine lubricant?
There is no substitute for a good quality sewing machine oil. One of the biggest causes of problems with sewing machines is that oil has been used that turns to gum or even a varnish like film with age. Sewing machine oil is a white mineral oil, meaning it is clear and has no smell. The oil has a light viscosity and will not collect on the machine's gears. It is usually marketed as machine or sewing machine oil. Cooking oil, car oil, and 3-in-one oil should not be used as substitutes.
Which sewing machine has the brightest light?
Some Singer models have very bright lights, especially their mid-level machines.
What was the order that light bulbs microwave oven air conditioning bifocals and sewing machaine come in order?
The order these items were invented is this: bifocals - 1760 sewing machine - 1830 Light bulb - 1879 Air conditioning - 1902 microwave oven - 1945
Where is the on off switch on a Brother 230 Galaxie sewing machine?
It doesn't have one. A lot of sewing machines don't have on/off switches apart for working the light. The foot pedal usually disconnects the power when not pressed but this can not be relied on. Therefore you should never leave a sewing machine plugged in when not in use. Often the early models have a suppression capacitor in the foot pedal that can go short circuit making the machine run on its own.
What are three inventions that helped industrial growth in the 1800s?
The light bulb, telegraph, and sewing machine
How do you oil the 385-19153 Kenmore sewing machine and what kind of oil do you use?
To oil the Kenmore 385-19153 sewing machine, first, turn off and unplug the machine. Use a few drops of light sewing machine oil, specifically designed for sewing machines, on the moving parts, including the needle bar, bobbin case, and any other accessible gears. Avoid over-oiling, and wipe away any excess oil with a clean cloth. Always refer to the user manual for specific oiling points and recommendations.
