Infinity.because the distance of object from mirror"p" and the distance from image to mirror"q" are equal,so by using formula
1/f=1/p+1/q
we can find the answer
as the image of plane mirror is virtual,so"q" is taken negative,so putting values
1/f=1/p-1/p(bcz p=q)
1/f=0
f=1/0
and any thing divided by zero is infinity.
hope this helps
rough focal length of concave mirror
Focus the rays of the sun, or a distance light to the smallest point that you can get. The distance from that image to the centre of the lens is the focal length.With the the sun's rays, make sure they are focused onto something which is not flammable. If using another light source, try one that is as far away as possible.
The value for the cleavage plane (100) is 38 GPa and the value for the cleavage plane (001) is 33 GPa.
To find the approximate value of the focal length of a convex lens, let us do an experiment. Place a convex some distance away from a light source. At the opposite side of the lens, place a white paper. Now adjust the position of the lens till a sharp point of light on the white paper is obtained. Measure the distance between the lens and the white paper. This gives the value of the focal leng
That can be determined fairly easily with a pendulum. The period of the pendulum depends on the length of the pendulum and the value of "g".
rough focal length of concave mirror
A calibrated focal length is an adjusted value of the equivalent focal length on a camera, so as to equalize the positive and negative values of distortion over a field.
You have to use your math is this question. First you have to put in all your number in the math equation once you get your value divide that by the diameter of the light bulb to the diameter of the actual object.
Step 1 Write down the maximum focal length of the lens for which you want to find the magnification. For instance, a 70-250 mm lens will have a maximum focal length of 250mm. A prime lens will have only one value listed, and this value should be considered the maximum focal length. Step 2 Multiply this value by 1.6 if you are attaching the lens to a digital camera. Most digital cameras have a 1.6x "crop factor", which means that the outside edges of a scene will be cropped because they do not physically fit on the sensor, making the effective focal length 1.6 times greater than it would be on a film camera. For a 250mm lens, the effective focal length would be 400 (250 times 1.6). Step 3 Divide the effective focal length by 100. An easier way to do this is to move the decimal point two spaces to the left. The effective focal length of a 250mm lens on a digital camera is 400mm, so divide 400 by 100 to arrive at four. Step 4 Multiply this value by two to find the magnification of the lens in terms of viewfinder magnification used in binoculars or telescopes. So a 250mm lens would have an 8x magnification (400 divided by 100 multiplied by two) on a digital camera.
A varifocal lens is a non-fixed focal length lens where the focus changes with focal length. This is in contrast to true zoom lenses, which retain correct focus throughout their focal length range. True zooms have a constant maximum aperture at all focal lengths (as in a 28-70mm f/2.8 lens), while varifocals have maximum apertures that increase (in number, but decrease is size!) as the focal length increases (as in a 28-70mm f/3.5-5.6 lens, which has a maximum aperture of f/3.5 at 28mm, that becomes smaller in size as the focal length increases until it reaches a value of f/5.6 at 70mm). Varifocals are easier to design and build than true zooms which explains their ubiquity in the camera market. Note that they are commonly, but erroneously, referred to as zoom lenses by users and manufacturers alike.
Value of Olympia beer mirror?
bla bla bla bla all you do is complain while im here at work bla bla bla if i could slap you right now i wouldn't because i care about you, and we need milk
Focus the rays of the sun, or a distance light to the smallest point that you can get. The distance from that image to the centre of the lens is the focal length.With the the sun's rays, make sure they are focused onto something which is not flammable. If using another light source, try one that is as far away as possible.
In geometry, a plane is a flat two-dimensional "surface" (similar to a sheet of paper, but with no thickness and no finite length or width). A plane is defined by three points, each of which forms a line with the other two points within the plane. In three dimensions, the simplest version of a plane would include all of the points with any x and y value that contain the same value for z.A plane is a flat surface or a 2-dimensional object, stretching to infinity in all directions.
The value for the cleavage plane (100) is 38 GPa and the value for the cleavage plane (001) is 33 GPa.
Length is not a value in itself. It is an attribute of objects and, in the context of an object, it may have a value. That value can be expressed as a power of 10.Length is not a value in itself. It is an attribute of objects and, in the context of an object, it may have a value. That value can be expressed as a power of 10.Length is not a value in itself. It is an attribute of objects and, in the context of an object, it may have a value. That value can be expressed as a power of 10.Length is not a value in itself. It is an attribute of objects and, in the context of an object, it may have a value. That value can be expressed as a power of 10.
i do not know tell me