0.008intake 0.009exhaust
Also,do you adjust them warm or cold?
Intake is .002-.004 inches and exhaust is .006-.008 inches when cold.
THE VALVE CLEARANCE ON THE 90 TRX300 IS 6/1000 COLD FOR BOTH INLET AND EXHAUST.
.16 of an inch both for intake valve and exhaust valve [cold]
Straight out of the original 1978 Manual: Intake Valve Clearance - Cold: 0.18mm or 0.007" Intake Valve Clearance - Hot: 0.20mm or 0.008" Exhaust Valve Clearance - Cold: 0.30mm or 0.012" Exhaust Valve Clearance - Hot: 0.33mm or 0.013" The manual states these specs are not the same for the 2T-G motor, only the 2T-C
.16 of an inch both for intake valve and exhaust valve [cold]
It is 0.40mm "Valve clearance (at cold) Intake mm(in.) 0.40 (0.0157) Exhaust mm(in.) 0.40 (0.0157)
0.40mm for both inlet and exhust when cold on 4jb1, 4jh1 engines
How to check valve clearance on 3E Toyota engine
It is 0.40mm "Valve clearance (at cold) Intake mm(in.) 0.40 (0.0157) Exhaust mm(in.) 0.40 (0.0157)
.07mm or .003 inches cold.
.003 in .005 ex cold