0
What else can I help you with?
How many gallons of gas in 6 cubic feet?
There are approximately 40.54 gallons in 6 cubic feet of gas.
How much gas would a 10x10x36 fuel cell hold?
To determine the volume of a 10x10x36 fuel cell, you multiply the dimensions: 10 feet × 10 feet × 36 feet, which equals 3,600 cubic feet. To convert this to gallons, you can use the conversion factor that 1 cubic foot is approximately 7.48 gallons. Therefore, the fuel cell would hold about 26,988 gallons of gas (3,600 cubic feet × 7.48 gallons per cubic foot).
How many liters are in 1000 cubic feet?
approx. 8 gal. of gas = 1000 cubic feet of natural gas. water can't be compared to natural gas in cubic feet
How many feet are in 262 cubic feet?
There are no feet in any cubic feet. "Feet" is a unit of length or distance, "cubic feet" is a unit of volume. If length units and volume units could be converted to each other, you'd be able to figure out how many gallons tall you are, or how many yards of gas you put in your car yesterday.
What is the specific volume of a gas weighing 5 pounds with a volume of 100 cubic feet?
The specific volume of the gas can be calculated by dividing the volume by the weight. In this case, specific volume = 100 cubic feet / 5 pounds = 20 cubic feet per pound.
What is the volume of gas in a 4 inch pipe 7000 feet long?
The volume of gas would be 598.7 cubic feet.
What is the density of 4 pounds of a gas that occupies 10 cubic feet?
0.4 pounds per cubic feet - a very massive gas!
What is the volume of one ounce mole of a gas at STP in cubic feet?
The volume of one mole of any gas at STP (Standard Temperature and Pressure) is approximately 22.4 liters. To convert this to cubic feet, we can use the conversion factor 1 liter equals 0.0353 cubic feet. Therefore, the volume of one mole of a gas at STP in cubic feet is approximately 0.791 cubic feet.
What is Ccf in natural gas?
A measure of volume- Ccf is one hundred (C) cubic feet (cf)
How is natural gas measured?
It is Measured in Volume as Cubic Feet
What is tcf unit of gas?
TCF stands for Thousand Cubic Feet, which is a unit of measurement commonly used to quantify the volume of natural gas. It represents one thousand cubic feet of gas.
How many cu ft will a 100 gallon tank hold at 135 psi?
To convert gallons to cubic feet, you can use the conversion factor of 1 gallon being approximately 0.1337 cubic feet. Therefore, a 100-gallon tank would hold about 13.37 cubic feet (100 gallons × 0.1337 cu ft/gallon). The pressure of 135 psi does not affect the volume in cubic feet; it only affects the density of the gas inside the tank. Thus, the tank still holds approximately 13.37 cubic feet of volume.
