Multiply the length x height x width, and you will find the volume.
Assuming we are talking about a common rectangular aquarium. (Length of tank in inches) x (Width of tank in inches) x (Depth of tank in inches) = Volume of the tank in cubic inches Volume/231 = Gallons in tank Please keep in mind that rocks, plants, fish, and decorations reduce the volume of the tank somewhat.
A liter is a measure of volume; we need to calculate the volume of the tank. For this we need to have all three measurements of the tank.
"Area" is an amount of flat surface. It has no volume. If the area is the bottom of a tank, then the volume of the substance in the tank is the area multiplied by the depth.
If the volume of the tank was effectivelly constant, and the tank was sealed to prevent gas escaping, the pressure of the gas would increase.
It depends on the shape of the tank.
The 20 foot by 40 foot cylindrical tank has a volume of 1005.7142857142849 cubic feet.
You would also have to know the volume of the tank.You would also have to know the volume of the tank.You would also have to know the volume of the tank.You would also have to know the volume of the tank.
WELL, The volume of the tank is 4*3*1.5=18m3. The volume of a rectangular stone is 0.15*0.1*0.08=0.0012m3. To raise the water to the top, the volume of stones that occupy the tank must be equal to the remaining space unfilled by water. That is, Volume of stones to be dropped = Volume of Tank - Volume of water in the tank. Now the Volume of water in the tank is 0.6*4*3=7.2m3. Empty space in tank = 18 - 7.2 m3 = 10.8m3. To get the number of stones to be dropped to fill this empty volume, Number of stones = Volume of empty space / volume of a stone. = 10.8 / 0.0012 = 9000.
Kilogram is weight, not volume.
No - kilograms are units of weight - not volume !
The answer depends on whether or not the tank has a geometric shape. If it has a shape that can be broken up into simply geometric shapes, each with a volume formula, you can calculate the volume of each section and add them together. Obviously that will not work with a random shape. In that case, you can fill the tank to capacity and then empty it out into measuring jars or flasks. Use the volume of the jars to calculate the volume of the tank.
The volume would decrease because the tank would implode