Taking pi as 3.14159
So, that's essentially a cylinder dia. 4ft. * 6 ft. long, and a sphere dia. 4 ft.
1.) cylinder = pi * r2 * length = 3.14159 * 4 * 6 = 75.3982 cubic ft.
2.) sphere = 4/3 * pi * r3 = 4/3 * 3.14159 * 8 = 33.5103 cubic feet
Total = 75.3982 + 33.5103 = 108.9085 cubic feet
The base diameter is .241", and the rim dia. is .291" for the .22 magnum cartridge. Neck diameter is .240", and overall case length is 1.052" while OAL of loaded cartridge is 1.35" Hope this is what you're looking for?
As with pretty much any bomb or missile, a weapon's overall length and diameter essentially it comes down to the delivery vehicle. In the case of the early gravity bombs, anything over 5' in diameter wouldn't fit inside the bombers of that time period.
it is grades
Revenue is important because it tells you how much money overall is coming into the business and after subtracting the costs you can see what your overall profit is.
Seat height is the seat And overall height is to the tallest point on the bike, like the bars
In measuring the length and diameter of a cylinder, the diameter should be measured more carefully. This is because the volume of a cylinder is directly proportional to the square of the radius (which is half the diameter). This means that even a small error in the diameter measurement can result in a significant difference in the volume of the cylinder. On the other hand, the length measurement, while also important, is not as critical to the overall volume calculation. In addition, the diameter of a cylinder is typically more difficult to measure accurately than the length, as it requires measuring across the center of the cylinder. Any slight deviation from the true center can result in an inaccurate diameter measurement, so it's important to take great care when measuring this dimension.
The length and the diameter of a glass cylinder are two different measurements that relate to its overall size. The diameter is the distance across the circular cross-section of the cylinder, while the length is the distance from one end to the other along the central axis. These measurements are independent of each other, but together they help define the shape and volume of the glass cylinder.
Depends. It's not the rim diameter that's important, but the overall diameter of the rim + tire combo. If the overall diameter changes, your odo and your speedo will be off. Bigger diameter, they will read low. Smaller diameter and the'll read high. But if you can go for a bigger rim, and a more low profile tire, then it's possible to ge the overall diameter to stay the same, and your gauges will still read true.
28.88 inches/733.5 cm.
overall diameter 451mm plus or minus 3mm
3.75 inch
Most of the South America continet is situated in the Southern Hemisphere, but some is also in the Western Hemisphere with just a small minority of the overall continent (like the tops of Brazil, Peru etc.) border into the Northern Hemisphere.
If 16mm is the overall diameter of the cable, yes - If that's the diameter of one core, then no.
"Small" and "large" intestine refer to the overall diameter of the 'tube'.
But you CAN determine the size of the planets: in diameter, overall mass, and in density.
Center of the bolts
Very different then the Northern Hemisphere as far as constellations are concerned, but overall, very similar. Check out the star maps in the link below and you can compare them.