1.15 gallons of water.
Volume of a cylinder is: Area of the circle x depth Area of a circle is: (pi * diameter^2)/4 where diameter is 2 ft Depth is: 1 ft Therefore, the volume of the cylinder is 3.14ft^2 * 1 ft = 3.14 cubic feet of water
Volume of water = (pi) x (Radius of the well)2 x (depth of the water)
A cylinder 155mm diameter and 245mm high can hold up to 1.22 gallons of water.
A round bath is a cylinder. The volume of a cylinder = area of the base x perpendicular height. Area of the base is πr2 (pi x radius x radius). The radius is half the diameter. The diameter is the width of the circular base. The perpendicular height will be the depth of the water, whether it's up to the top or up to where you have a bath.
Assuming 60 foot diameter ( 30 foot radius)>Volume (US gallons) = (pi * r * r * depth) / 0.1336805556 = 126,904.0>Volume (UK gallons) = (pi * r * r * depth) / 0.16054365324 = 105,669.7
This is kind of tricky, but here are the basics: Volume is the surface area of the cylinder multiplied by the depth of the water. Do not mix feet and inches, convert all dimensions to feet or inches, depending on the application. To calculate the surface area, measure the inside diameter of the cylinder, divide the diameter by 2 and then multiply by Pi (3.1416). Multiply the surface area by the depth of the water and use following information for conversion: water is 231 cubic inches per gallon or 7.481 gallons per cubic foot.
Volume = (height)(base)(depth)cube = all equal sideswater level = water volume + volume of cubes
A cylinder that is 18 feet long and has an inside diameter of 4 feet has a volume of about 1,692 US gallons of water.
You need to know the length and radius (1/2 the diameter) of the cylinder. From there, use this formula: V = radius2x Pi x length
Volume of the cylinder= hπ r 2 h= π (o.25) 2 (6)= 4.712 sq. ft= 294.029 lb.
The formula for the volume of a cylinder isV = πr2h where r is the radius of the base and h is the height.Thus, the volume of water needed to fill said cylindrical pool to a depth of 6 feet would beV = π(7.5)2(6)V = 337.5π which approximately equals 1059.75 cubic feet.
The formula for volume of a cylinder is (pi *r2 )h