46.2kg
The weight of rebar can be calculated using the formula: weight = (diameter^2 * length * 0.006165) kg, where the diameter is in mm and length is in meters. Substituting the given values, the weight of the rebar would be approximately 22.98 kg.
0.888 kg/m
3.83
The weight of a hollow MS (mild steel) pipe is determined by its dimensions and material density. You can calculate the weight using the formula: weight (kg) = (outer diameter - inner diameter) x inner diameter x length x density of MS. The specific density of MS used will affect the weight of the pipe.
To calculate the weight of a bronze pipe, you need to know the dimensions (length, outer diameter, and wall thickness) of the pipe. Then, you can use the formula: weight = (outer diameter - wall thickness) x wall thickness x length x density of bronze. Finally, multiply the result by the density of the bronze material to get the weight.
the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.
No, the length of an object is not affected by gravity. Gravity influences the weight of an object, but not its physical dimensions.
The weight of a 12mm diameter mild steel (MS) rod per meter length can be calculated using the formula: Weight = (Diameter^2) x 0.00617 where Diameter is in mm. Therefore, for a 12mm diameter MS rod, the weight per meter length would be approximately 0.888 kg.
The Dimensions vary. The average length is about 150mm. The average diameter is about 12mm.
10mm ms rod for waight
13mm diameter & 3100 length pl. give me weight
That depends entirely on what material it's made from ! The dimensions are irrelevant unless you tell us what it's made from !
it weight 175 grams and is 25 cm in diameter
To calculate the weight of the steel rod, you first need to find the volume using the formula for the volume of a cylinder (V = πr^2h, where r is the radius and h is the height). Then, you can calculate the weight by multiplying the volume by the density of steel, typically around 7850 kg/m^3. Finally, convert the volume into meters before calculating the weight to ensure consistent units.
Diameter: 21.2 mm Thickness: 1.95 mm Weight: 5.00 gm
You need the length of the rod to compute the weight. To do so, you can calculate the volume of the rod, which would be length*Pi*22 multiplied by the density of MS, which is 7.86 g/cm3, or simply 15.72(Pi)*length of the rod Mildsteel rod 40mm dia. = 9.85 kg per metre. I think that is what you asked.
Pounds are a unit of weight and centimeters are a unit of length. We can't convert one to the other. Something that weighs 160 lbs will have dimensions, but the dimensions of 160 pounds of lead will be vastly different from the dimensions of 160 pounds of feathers.
D=Diameter L=Length ={(D^2)/(162)*L}
Weight per metre length= 0.559 kg
Diameter 24.26 mm (0.955 in)Thickness 1.75 mm (0.069 in)Weight 5.67 gm