answersLogoWhite

0

the weight should be change by the diameter of the rod.one rod length is thirteen meter and it should be measured in meter only. The formulae to find the weight of rod is d square /162 and you wil get unit weight then multiply it in length then u got a weight of the rod.

User Avatar

Wiki User

13y ago

What else can I help you with?

Continue Learning about Physics

How much weight can a curtain rod support?

The amount of weight a curtain rod can support depends on how many support brackets are helping support it. The more supports, the more weight. If there are no supports a typical rod can hold 20-30 lbs.


How do you calculate the weight of aluminum rod in inches?

To calculate the weight of an aluminum rod in inches, you would need to know the density of aluminum (which is about 0.098 lbs/in^3) and the volume of the rod (which can be calculated using its length and diameter). You can then multiply the volume by the density to find the weight of the aluminum rod.


What is the lenght of the iron rodhaving weight 50kg and a weight of 10kg is attached at its one end it balances itself from a point 6m from the same end?

Well it will be where the wright of the overhang rod equals the weight of the rod plus the weight of the 10kg so we have 60kg total weight we will need 30 on each side so you will have 30kg of the rod weight on one side of the balance and 20 rod and 10 of the weight on the other so you have 20/50th or 2/5th of the rod weight on the side with the weight so 6m=2/5th * L where L is the length of the rod so 6*5/2=L or the rod is 15m long.


How much does a wood dowel rod weigh?

The weight of a wood dowel rod can vary depending on its diameter and length. As a rough estimate, a 1-inch diameter wood dowel rod that is 36 inches long can weigh around 0.5 pounds. It's best to weigh the specific rod you have for an accurate measurement.


Formula to find weight of a steel rod whose dimension are 8mm diameter 1meter length?

You look up the density of steel, then calculate the volume of the rod, then multiply the density by the volume to find the mass of the rod. To find the weight of the rod, you multiply it's mass by gravataional acceleration.The rod has a cross sectional area of Pi x (0.008 / 2)2 m2Volume of the rod = 1 x 5.027x10-5Steel has a density of approx. 7850 kg/m3.Mass = Density x VolumeMass = 7850 x 5.027x10-5Mass = 0.395 kgWeight = 0.398 x 9.81Weight = 3.871 Newtons

Related Questions

What is the weight of 12mtres length of 20mm TMT rod?

The weight of a TMT (Thermo-Mechanically Treated) rod can be calculated using the formula: Weight (kg) = (Diameter² × Length × 0.00617). For a 20mm diameter rod that is 12 meters long, the weight would be approximately 15 kg per meter. Therefore, the total weight of a 12-meter length of 20mm TMT rod is about 180 kg.


What is the current price for TMT rod in tamilnadu?

as on 04/11/11....tmt rod price in chennai is approx. rs.39200/ton


What is the current price of tiscon TMT rod in assam?

65


What is the unit weight of 10 mm dia tmt bar?

0.62 kg/m is the unit weight of 10 mm dia, and you use the thumb rule for all other dia unit weight per metre = d*d/162 where- d is dia of bar/rod in mm


What is the current price of Tiscon TMT rod?

Currently rat of FFaridabad


What is the unit weight of 20 mm dia tmt bar?

Density = mass/volumeThe unit weight of steel is 7850 kg/m3volume of bar = (πd2/4)*Lhence mass = ((πd2/4)*L)*7850= ((3.14 *d2/4)*1)*7850 for unit length= 0.785*d2*7850= 6162.25 d2 if d is in metersor d2 /162 if d is in mm.By putting the value of diameter of rod, you can calculate the unit weight of any size tmt bar.


What does one foot of 1 steel rod weigh?

The weight of 1 foot of steel rod would depend on the diameter of the rod.


What is the weight for 1mt or 1ft of 8mm IRon rod?

8 mm iron rod 1 feet how much weight its come


What formula weight calculation of ms rod?

The formula weight calculation of a mild steel rod (MS rod) involves adding the atomic weights of each element present in the rod. This includes the weight of iron (Fe) for the steel component and any other trace elements. The calculation typically follows the formula weight = (atomic weight of element 1 * number of atoms of element 1) + (atomic weight of element 2 * number of atoms of element 2) + ... and so on for all elements present in the rod.


What is tmt medical test?

what is tmt test in medical


How do you calculate oval and square for tmt bars rolling?

TMT bar oval weight Stand oval size in mm like 12mm size bar oval size-12*.8=9.6kg/m


What is the weight of a 32 millimeter steel rod of 1 meter?

6.320kg/m