An 'armature winding' is the rotor winding, and the 'field winding' is the stator winding.
Winding: To wind the coils into the slots on the stator or rotor and connecting them up to form a winding. Re-winding. Is to remove the old winding and doing what I explained above.
In the case of a capacitor-start/run single-phase induction motor, the main field is provided by the main (running) winding, and the capacitive branch is the auxiliary winding. In the case of a capacitor-start motor, the main winding is the running winding and the auxiliary winding is the starting winding.
primary winding and secondary winding how this turn.
start winding is thicker with less number of winding whereas run winding is less thicker than start winding but with more number of winding. As we know inductance depends upon numbers of turns of winding so run winding will have more inductance.
Mainly the older clocks only require winding because they are manual in operation.
Yes
Winding can be a present participle when it is used as a verb form (e.g., He is winding the clock). It can also be used as an adjective, such as in "a winding road," which describes the road as having twists and turns.
8 days
$150.00
Winding the mechanism that powers Big BenThe Great Clock is wound three times a week. First, the auto-winding mechanism is set. This winds the striking train and the chiming train. Then the winding handle is attached to the going train. This part of the mechanism must be wound by hand. When the winding handle is operated, 'maintaining power' is activated. This keeps the Great Clock going while winding takes place. Oiling the mechanism is part of the clock's regular maintenance to keep all its parts in working order.
By winding them, old clocks(and some new ones) are powered by a system of springs. By winding the clock or watch you compressed the springs, which allowed them to store energy to power the clock or watch
Winding a clock or watch in the wrong direction can cause damage to the internal gears.
8 days
no hours
the answer is 0wont run at all without windingIt can't.
there is no specification of Dy11.. it will be Dyn11.. it is the vector group of the transformer. capital d means primary winding is delta secondary winding is star(y) and the secondary current lags voltage by 30degree this angle when shown in clock will be looking like 11 o clock