rj45
CAT 5/CAT 6 with RJ-45 connectors
You use a Rj-45 connector with twisted-pair cabling in an Ethernet LAN. Rj-45 is a connector with a 4 5 wiring sequence.
It is a troubleshooting tool to determine the wiring of a connector interface on a computor or networking device. It is inserted between two electrical devices to find which signal or power interconnects are available.
To disconnect the wiring connector on a thermostat for a Ford Mondeo MK3, first ensure the ignition is turned off and the engine is cool. Locate the connector at the thermostat, press the release tab on the connector while gently pulling it away from the thermostat. If the connector is stubborn, wiggle it slightly to help loosen it without damaging the wiring. Always handle the connector carefully to avoid breaking any clips.
In the manual
The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.The diagnostic connector is along the wiring harness, under the hood, on the passenger side firewall.
the standard is (c) 568-b
To disconnect the wiring connector from the headlight bulb socket on a 2000 Chrysler Voyage, remove the wiring that goes into headlight plastic lock ring. Snap it loose and pull out the bulb socket.
The brake controller wiring harness connector for the 2005 GMC Envoy is located under the dash on the driver's side of the vehicle. Look for a connector plug not connected to anything, next to the hood release latch.
TIA/EIA-568-B.1-2001 is the governing document.
no power to ODB connector
check connector and the wiring from the connector.