The turning radius on the Jeep Wrangler are so tight due to the rear and front axles being locked together.
Hand tight is usually all that is required. I recommend turning it 3/4 turn after making contact with the mounting surface. That way it is tight enough but not too tight.
Incredibly painfull, trust me, they are so tight, you will start turning japanese.
An Olympic swimming pool must be 50m long with a tolerance of 0.03m for 0.3m above the surface to 0.8m below the surface of the water. There is not such a tight tolerance on the width of an Olympic swimming pool which is 25m wide
A box wrench is always the most effective to loosen tight nuts.
Laser cut acrylic productsare crafted on tight tolerance EPS foam. This consists of a reinforced mesh and acrylic polymer cement surface skin.
A 2000 Nissan Altima is an interference engine which has very tight tolerance. A slight misalignment can cause the pistons and valves to slam into each other.
Acronym of TOLERANCE
Tolerance.
A 2001 Pontiac Sunfire 2.2 engine is a zero tolerance engine which will suffer catastrophic damage should the timing system fail. Because of the tight tolerances inside the engine, even being out of alignment a fraction of a second can cause the valves to slam into the pistons.
anti clockwise. it is just like unscrewing an oil plug.
Maybe the ford escape just doesn't have a tight turning circle at all. Maybe all Ford Escapes are like that.