Want this question answered?
what r the torque specs on the plate covering connecting rods on a 2000 honda civic 1.6?
what should you torque the rocker arms to when you reinstall the push-rods to on a 3.4 pontiac
45 lbs
What is the torque of 1991 ford escort piston rods
torque for head bolts 3 size diferent and rods
Hi, the tightening of the con rod bolts is done in 2 stages, Stage 1 is 30nm or 22 lbft. Stage 2 is a further 180deg (half a turn). Hope this is of some help. Woody-K
45lb Rods 65/75 main inter/outer45lb
rocker arm capscrews 19 ft-lbs that should be what your looking for... you don't torqe the rods, you torque the rocker arms and that's what its supposed to be
76 mains 46 rods according to the Toyota service manual
45 foot pounds for regular connecting rods and 65 foot pounds for SD connecting rods.
Most all 350 rods torque at 45 FT. LBS.I would like to know the year.
Turn the motor over until the valve is completely closed. Back off the nut and turn the push rod with your fingers while slowly tightening the nut. When you can no longer turn the push rod with your fingers, turn the nut another 1/2 turn.