Power factor is defined as the ratio of real power over total power. Total power is the vector sum of real and reactive power.
It's the ratio of the total power of the two motors and their total apparent power (input side, of course.)
As of end of August 2013, there are 434 working nuclear power reactors (with total rated power 370.543 Gigawatt plus 69 nuclear power reactors under construction (with total rated power 67.196 Giagawatt).
calculate the total sum of lighting power and add 10% as safe operation of the transformer. then select a transformer for that rating. suppose your total lighting power is 300VA. add 10% of the total lighting power so the total power is 330VA. therefore your transformer size can be 330va or more. please follow IEE regulations.
If you have unity power factor, p.f.=1, then the real power P must equal the total power S. Therefore, there is no reactive power being used, Q=0.Alternative AnswerApparent power is the phasor (vector) sum of true power and reactive power: (apparent power)2 = (true power)2 x (reactive power)2
Total Power = Carrier Power * 5
Power factor is defined as the ratio of real power over total power. Total power is the vector sum of real and reactive power.
The total power equals the sum of the individual powers because power is the rate at which energy is supplied. Whether you have a series or parallel circuit, the total power comes from the power source.
Microscopes vary in power. You can determine total magnification by the eyepiece and the lens.
Total Power = Power of unmodulated carrier + 2 * Power per sideband
Nuclear power accounts for 6.3% of world's total primary energy supply or 16% of world's total electricity production.
It's the ratio of the total power of the two motors and their total apparent power (input side, of course.)
43.00D
AS:total power = P1 + P2 + P3 + .......so,total power = 5(50mW)= 0.25Wtotal power dissipated by the five resistors is 0.25W.
total power produced engine is called indicated power.
1 to the power of anything is always 1
real power is to do do work and it is supplied to the load ,where as the reactive power is used for magnetising and the apparent power is the total power