0
What else can I help you with?
How many devices can be connected in a SCSI chain (plain SCSI)?
In a plain SCSI (Small Computer System Interface) chain, up to 8 devices can be connected, including the SCSI host adapter. This means there are 7 additional devices that can be connected to the chain. SCSI IDs range from 0 to 7, with each device needing a unique ID for proper communication.
Which type of hard drive cable connects drives in daisy chain series and requires manual termination at each end of daisy chain?
SCSI
To reduce the amount of electrical noise or interference on a scsi cable each end of the scsi chain has a?
terminanting resistor
What is a task that you have to perform when installing SCSI devices?
Assign each SCSI device a unique ID number
Which type of hard drive cable connects drives in a daisy chain series and requires manual termination at each end of the daisy chain to prevent data corruption?
The SCSI cable.
Which scsi hard disk has highest priority?
7 would be highest prority, then 6,5,4,3,2,1,0. For wide scsi, it is still 7, then 6,5,4,3,2,1,0,15,14,13,12,11,10,9,8. Scsi controller should be set to 7, and for hard drive, 0 CD-ROM=3 This is the standard, though as long as each device has a unique I.D. all should be well.
Up to how many devices SCSI-2 Cables can support?
SCSI-2 cables can support up to 8 devices on a single bus. This includes one SCSI controller and up to seven additional devices, such as hard drives, scanners, and printers. Each device is connected in a daisy-chain configuration, with unique IDs assigned to avoid conflicts.
How should you place terminations on a scsi bus with one internal hard drive and one external cd-rom drive?
Simply terminate each of the devices. Terminate the hard disk as well as the external cr-rom.
Does a Windows-based systems identify each drive by a unique letter?
yes
What are the major components of scsi in a computer?
A SCSI connector is used to connect computer parts that use a system called SCSI to communicate with each other. Generally, two connectors, designated male and female, plug together to form a connection which allows two components, such as a computer and a disk drive, to communicate with each other. SCSI connectors can be electrical connectors or optical connectors. A "Mac Stack" of external SCSI devices displaying various SCSI connectorsThere have been a large variety of SCSI connectors in use at one time or another in the computer industry. Probably no computer interconnect (with the possible exception of RS-232 serial) has caused as much confusion. Twenty-five years of evolution and three major revisions of the standards resulted in requirements for Parallel SCSI connectors that could handle an 8, 16 or 32 bit wide bus running at 5, 10 or 20 Mbit/s, with conventional or differential signaling. Serial SCSI added another three transport types, each with one or more connector types. Manufacturers have frequently chosen connectors based on factors of size, cost, or convenience at the expense of compatibility.SCSI often makes use of cables to connect devices together; in a typical example, a socket on a computer motherboard would have one end of a cable plugged into it, while the other end of the cable plugged into a disk drive or other device. This would mean that four connectors were involved in wiring the disk drive and computer together: the connector on the motherboard, the connectors at each end of the cable, and the connector on the disk drive. It is sometimes possible to have cables which have different types of connectors on them, and some cables can have as many as 16 connectors (allowing 16 devices to be wired together). Some types of connectors are typically used inside a computer or disk drive case, while others are used to connect a computer to a separate device such as a scanner or external disk drive.
What is the name of the archipelago island chain?
There are many archipelago island chains around the world, such as the Maldives, the Philippines, and the Hawaiian Islands. Each chain has its own unique name.
What are the different types of drive train systems used in bike technology?
The main types of drive train systems used in bike technology are chain drive, belt drive, and shaft drive. Chain drive is the most common and uses a chain to transfer power from the pedals to the wheels. Belt drive uses a belt instead of a chain, which is quieter and requires less maintenance. Shaft drive uses a shaft to transfer power, providing a clean and low-maintenance option. Each system has its own advantages and disadvantages, depending on the rider's preferences and needs.
