0
What else can I help you with?
What is used to secure the base frame to the ground?
double-headed spikes
What is used to secure the base frame to ground?
double-headed spikes
What is used to pull the spikes from the base frame?
Spike puller and wood
Is the water frame still used today?
yes they go strong under ground
What is used to remove the spike from the base-frame?
spike puller and wood block for leverage
What is a suitable ground on a quad?
The frame is the best ground source on nearly all vehicles (assuming it uses a negative ground system, which is the most common type-negative post of battery is attached to the frame). If the frame can't be used, a metal part attached to the frame *may* be substituted, but always make sure to clean the attachment point to BARE metal, as paint or powder coating can act as an insulator, preventing a good ground connection.
What is used to secure a Jeep YJ soft top frame to the Jeep?
there are short torx bolts and flat nuts made specifically for mounting the frame to the body. The windshield rail is held on with screws.
What are girths used for?
Girths are used to secure the saddle on the horse's back so that, when tightened adequately, the saddle won't slip, sending you to the ground.
What type of screws should be used to secure a door properly?
To secure a door properly, it is recommended to use long screws that are at least 2.5 inches in length. These screws should be installed into the door frame and the wall studs to provide a strong and secure hold.
How can polyethylene be held tight against the greenhouse frame?
Polyethylene can be held tight against a greenhouse frame using methods like clips, channels, or ropes. Wiggle wire and lock channels are commonly used for securing polyethylene covering, providing a secure fit while still allowing flexibility for expansion and contraction due to temperature changes. Additionally, batten tape can be used to fasten the polyethylene to the frame to ensure a snug and secure fit.
What are the different types of bicycle frame grommets used for cable routing and protection?
Bicycle frame grommets are used for cable routing and protection. There are different types, including internal grommets that guide cables inside the frame, external grommets that secure cables on the outside, and full-length grommets that cover the entire cable length for added protection.
Why is a ground called a ground?
A ground is called a ground because it refers to the Earth or a conducting body such as the metal frame of a building that is used as a common return path for electric currents. The term "ground" signifies a reference point to which electric potentials are compared or connected for safety and functional purposes.
