Want this question answered?
If you are referring to electrical cord that would be, Service grade Oil resistant
Whale oil.
1% or less of all oil consumption goes toward making plastics, so it is a sustainable source. However, we also consume oil as fuel, and THAT is where oil becomes an unsustainable source. If we can move away from oil as a fuel, then oil becomes sustainable.
Crude Oil is the mixture of difference substances, substances are seprated from crude oil through the process of Fractional Distillation. the substances extracted from crude oil are as follow : Fuel Gas (LPG) Petrol Naptha (used for plastics) Kerosene Diesel Fuel Oil (used to Fuel Ships) Lubricating Oil Bitumen (used for building roads)
oil
stick an ohmmeter in it, that will measure the resistance. then you can tell us.
Oil or similar is used as a cooling fluid in electrical transformer, because it is electrically insulating - which water is not. The figure of merit is the lack of conductivity.
Heat engine utilizes low heat value of oil and also the fuel oil consumption for IC engine usually based on high heat value of oilby Shyam
per gallon method of valuing a motor fuel dealer
No. 6 fuel oil has a combustion value of 151,300 - 155,900 Btu/US gallon.
Which crude?
Petroleum Is a fossil fuel
btu per pound * pounds per gallon OK, it sounds as if you know the value of fuel in oil btu per pound.Now find out how much a gallon of fuel oil weighs and multiply the btu value x that weight in pounds and that is the value per gallon. Or simply, diesel fuel is #2 fuel oil which contains 140,000 btu per gallon.
The oil thermal plant refers to the chemical energy that is stored in the fossil fuel like the natural gas, oil shale, fuel oil, and coal. They are usually successively converted into thermal energy, mechanical energy, and electrical energy.
In general water, fresh water (0.01 S/m) to sea water (4 S/m), is more conductive than oil (more or less from 20 pS/cm to 1000 pS/cm)
The fuel-oil mixture enters the fuel-oil separator. Since the oil is denser than the fuel, by centrifugal separation, it will separate the oil and fuel. the fuel will be on top and the oil will be at the bottom.
blown crankshaft oil seals or water in fuel/oil or CDI faulty or low battery acting like a load on the electrical system.