Want this question answered?
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
Yes. The resistance of a globe depends not only on the wattage of it but also on the voltage. A 12 V Globe would has a quarter the resistance of a 24 volt globe for the same wattage. (when alight)
The average air compressor uses only about 120v. Which is the average house socket. Thus using about 400 Watts of power.
Relative Humidity!
The medium filament will be the light producer. This is because that filament is connected to the center pin of the lamp base the same as ordinary light bulbs. If the tri-light bulb is 50, 100 and 150 watts, the 100 watt portion will light.
NO preamp has wattage or a wattage rating. The only wattage involved in a sound system comes from the POWER amp
The best way to validate your research instrument is to use it. The only way to know if your instrument is going to work is if you've personally seen it work.
A higher wattage HPS bulb may work with a ballast that is rated for a lower wattage bulb , but may appear to be dim and will not produce the rated light output. It is best to match ballast and bulb accordingly.
I know him only as F. Bridgetower, & he was a cellist.
The wattage will depend upon the type of bulb and the number of lights on the string. It will tell you on the package what each bulb requires in wattage, so you only need to multiply that by the number of bulbs in the string. so, number of bulbs x wattage requirement for each bulb = wattage requirement.
Yes. The resistance of a globe depends not only on the wattage of it but also on the voltage. A 12 V Globe would has a quarter the resistance of a 24 volt globe for the same wattage. (when alight)
They are all equally good, the only difference is in the wattage. If you need more sound, then go with a higher wattage speaker.
Of the little I know about them my only source tells me no they are apparently an easy instrument to play
The violin is said to be the most diversely expressive instrument, second only to the human voice.
Yes, the higher the wattage, the better.
AT/ATX PC Power Supply Units (PSU) are typically rated in Watts. The Wattage Rating can be in Peak Wattage or Constant Wattage. Every Power Supply has a peak wattage and a constant wattage, but it isn't uncommon for only one or the other to be advertised and not both. Peak Wattage is how many amps the PSU can give out for a short period of time before overheating. The length of time a PSU can sustain this peak wattage is generally about 30-60 seconds. Constant Wattage is how many amps the PSU can give out nonstop. This number is always less than its Peak Wattage counterpart. Constant Wattage is usually (but not always) rated at 40c. For example, if we assume a 75% efficiency between peak and constant wattage, a PSU may be advertised at 500 Watts peak, but may only do 375 Watts constant. When compared to a 450 Watt constant PSU, the 500 Watt peak PSU might sound more powerful at first, but the 450 Watt constant PSU would be able to do 600 Watts peak.
Your question cannot be answered factually because we simply do not know. Novelists assume that she could play one, but that is only a piece of fiction, built on the assumption that all upper class women were schooled in some type of music. When and if her tomb is discovered, we will know for certain as a musical instrument would be included in her grave goods.