yes because the zinc melts and causes it to weld
Dross
Argon is used in welding to prevent oxygen from entering the weld site. Oxygen is basicly bad for the weld and Argon displaces the oxygen which results in a better weld (less heat stress, less air pockets (imperfections in the weld) etc.)
Flux is used to protect the weld from the atmosphere. Flux produces a gas shield over the liquid portion of the weld during the welding process as the electrode is used. The flux then forms a protective layer over the weld called slag. Flux also acts as a deoxidizer, pulling oxygen and nitrogen from the weld pool to the surface, preventing porosity. There are many other and much more technical reasons that involve chemistry of the weld metal, arc characteristics, and mechanical properties of the finished weld.
alpha decay
weld decay
Depends on what you are welding, but generaly welds can meet, or even weld on top of a weld.
Theodore Weld
The address of the Weld Public Library is: 25 Church Street, Weld, 04285 0120
The address of the Weld Historical Society is: Po Box 31, Weld, ME 04285-0031
A butt weld is a weld made between two straight cut profiles , a socket , or plug weld is made between a surface and a hole.
WELD - AM - was created in 1956.
Bill Weld's birth name is William Floyd Weld.
Tuesday Weld's birth name is Weld, Susan Ker.
circumfrencial weld is sometimes referred to as Girth weld. its just another term.
The seal weld in a structure is used a weld used for tightness. Specifically this type of weld is used for holding in liquids or gaseous materials.
Tuesday Weld is 72 years old (born Susan Weld, August 27, 1943).