Provides a way to keep cords organized
Look to see if the 30 amp panel is fed with a two wire or a three wire. If it is a two wire then you are out of luck. If the panel is fed with a three wire then the panel should have the neutral terminated in the panel. It is this neutral that you need for 120 volt connections. You didn't state how many panel slots there are in the panel. If you are able install a 15 amp breaker into the panel and connect the wires going to the load. The black wire will go to the breaker and the white wire will go to the neutral bar in the panel.
One of the best wire management services is Texcan. They have competitive pricing and are able to work with customer requirements to provide the right wire management for the customer.
no
Put the solar panel in the sun;Attach the red wire of the panel to the positive terminal of the battery;Attach the black wire of the panel to the negative terminal.
The voltage of the solar panel is less important than the total amperage. Proper wire size is determined by amperage that will be going through the wire. Wire INSULATION determines the voltage that a wire can carry.
all the positives will go to fuse panel. The hot wire will come from battery to fuse panel. All the negatives will need to be joined together at the negative post of battery.
Ground wire to neutral wire.
White
You need to be more specific. Is this your feed?? Is this a home run (the wire that is feeding a circuit). Anyway if this is your feed wire (the wire supplying power to your sub panel) then you will land your two hots , then you will land your ground wire on the lug that is bonded to the panel. Sometimes this is a ground bar that can be screwed to the panel itself and then your neutral will go to the bar that is not touching anything. So your neutral coming in will be tightened down to the same bar as the neutrals that are feeding the circuits. This is assuming you'r are feeding your sub panel with 2 hots, a ground and a neutral.
The neutral wire is the return wire back to the distribution panel from the load. Without this return wire no load will work.
Yes, they are the same size wire.
in the drivers kick panel. it is the green wire with a black stripe.