Your rear axle is probably out. This would explain it moving in 4x4 because its utilizing the front axle.
Dodge Dakota was created in 1986.
The Dodge Dakota was in the Dodge car brand until 2009, and was sold as the RAM Dakota until 2012.
Anything is possible, but this would not be easy.
Check the solenoid & check wires to see if they are grounding on metal. I would guess that the small wire on solenoid (marked "S" for switch) is making contact with the engine/frame thus making a complete curcuit but bypassing the ing switch.
The Dodge Dakota was originally taken off of Dodge in 2009, then renamed the RAM Dakota until 2012.
From 1997-2003 the Dodge durango is the same chassis as the dodge dakota, same powertrain.
When making changes to anything electrical a person needs to have a diagram. The wiring diagram for the power windows on a 1988 Dodge Dakota can be found in its manual.
Dodge Dakotas do not, and have never, had transaxles.
The towing capacity of a 2000 Dodge Dakota V6 is about 7500 pounds. The Dodge Dakota was discontinued in 2011.
4.7 dodge Dakota has 230 hp.
with a cutting tool and duct tape, anything can fit.
No they won't. They completely changed the Dakota bed in 1997
A 1997 Dodge Dakota does not have an EGR Valve.
97 Dodge Dakota Club Cab is 6x4.5
Where is Pcv on 4.7 2002 dodge dakota
if its the same size motor it will.
no, probably not
Yes, depending on engine SIZE. (;