The transmission is shot ... or very very low on fluids.
There could be a few reasons on why your 1977 Mercury Mountaineer is not going in reverse. The most common thing that could be wrong with it would be the gears are broke.
hi there. it probably means the shaft that drives the fan is slipping. and it only grips the fan when it is turning at a lower speed. hope that helps..... no sorry. i mean the belt that drives the fan might be slipping.
This is a internal problem, I had same thing wrong and I replaced all I could then brought it to shop and he said the bands are slipping
could be either transmission shift linkage not engaging reverse ( stops at neutral ) worn joint connectors sometimes cause this. or reverse clutches or gears bad inside transmission.
IDE drives only last for a linited number of years
No Density also drives convection.
With limited knowledge and tools for rebuilding an automatic transmission, and you want to DIY, purchase a good used transmission from a salvage yard and install it yourself.
With limited knowledge and tools for rebuilding an automatic transmission, and you want to DIY, purchase a good used transmission from a salvage yard and install it yourself.
only one
If your Ford Contour only drives in reverse, it could be due to a few potential issues. Common causes include a malfunctioning transmission, low transmission fluid, or a problem with the gear linkage. It might also indicate internal transmission damage that requires professional assessment. It's advisable to take your vehicle to a mechanic for a thorough diagnosis.
the forward gear clutch pack is worn out. the only solution is to get the transmission rebult.
Scandisc only works on hard disks and floppies, not on tape drives, CD-ROM drives, or DVD-ROM drives.