Hi, unleaded over 92 octane is good but you can run 89. Change oil very often if you have supercharger SSEI
You need to take of the door panels!
what tools do i need to remove the wheel cylinder on a 1993 pontiac bonneville
Need to know which parts you need.
R134a
The PCV valve on a 2002 Pontiac Bonneville is located on the back of the in take manifold, however to get to the PCV valve you will need to remove the valve cover.
Before you remove the evaporator core from a 1998 Pontiac Bonneville you need to have the air pressure discharged. You will then need to remove the AC unit. You will need to remove some screws before you can remove the evaporator.
30
Go to an auto parts store and ask them.
Any DEXRON-III synthetic transmission fluid. Some brands seem to work better than others.
On a 1996 Pontiac Bonneville SE, the mass air flow (MAF) sensor is located in the air intake duct, between the air filter and the throttle body. It is typically housed in a plastic housing and may be connected with screws or clips. To access it, you may need to remove the air intake hose. Ensure the engine is off and cool before attempting any work on it.
just need to know where it is located on car
drain is on the lower side of the radiator opposite of the fill neck. You will need to remove the splash shield from underneath the car to view the petcock. check out www.pontiacbonnevilleclub.com for more info.