answersLogoWhite

0

a high pitch

User Avatar

Wiki User

10y ago

What else can I help you with?

Related Questions

What happens to a pitch if you shorten the string?

The frequency of a pendulum is inversely proportional to the square root of its length. If you want to increase the frequency of a pendulum by a factor of 10, you make it 99% shorter.


Which factor would lower the pitch of a string?

The tension of the string. Less tension = lower pitch. This can be achieved by loosening the string or lengthening the string.


The longer the vibrating object the lower the pitch would be a fact concept principle or theory?

This statement aligns with the principle of sound waves and frequency. Longer vibrating objects produce slower vibrations, which result in lower pitch sounds. This relationship is commonly observed in musical instruments like string instruments and wind instruments.


What would happen to the sound if you changed both the length and the tension of the string at the same time?

Changing both the length and tension of a string simultaneously will greatly affect its frequency and pitch. Increasing tension while decreasing length will raise the pitch, and vice versa. This is due to the relationship between frequency, tension, and length in vibrating strings.


How is the higher note produced on a single string of a stringed instrument?

A higher pitch or note is produced by either shortening the string length by fingering (as in a guitar or violin), or by tightening the string, as in tuning a guitar. Higher pitches can also be played by lightly touching a string at its exact midpoint while plucking it, which suppress is fundamental pitch will allowing its harmonic to sound. This would produce a sound one octave higher.


What frequency would you hear with a 340 Hz tuning fork near a guitar string vibrating at 350 Hz?

340 hz is the pitch or note that is sounding. It's the times the string would vibrate per second. By 350 hz guitar, I would get you would be playing a note on the low E string and it would sound sharp to the tuning fork. You would hear a subtle beat or pulsing when sounded together. That beat would get slower and slower as you loosened the string to bring the pitch down until it quit altogether. Your would then have that note tuned to 340 hz. BTW...standard tuning is called A440 meaning that the A note is tuned to 440hz.


How would the pitch change if you pull the string tighter?

If you pull the string tighter, the pitch of the sound produced will increase. This is because the tension in the string increases, causing it to vibrate at a higher frequency, resulting in a higher pitch sound.


If all the strings on the guitar in the picture were plucked and allowed to vibrate freely the string at the top would produce the highest pitched sound. What could be concluded about the rate of vibr?

The top string would be vibrating the fastest.


If a vibrating anchored at each end is shortened in length with tension remaining constant one would notice an apparent pitch increase or decrease?

If a vibrating string anchored at each end is shortened, the frequency of vibration will increase, leading to a higher pitch. This is because the shorter length results in shorter wavelengths and higher frequencies. On the other hand, if the tension is increased while keeping the length constant, the pitch will also increase due to higher tension causing higher frequencies of vibration.


What would increase if a metal string is stretched horizontally?

The tension in the string would increase as it is being stretched, causing the string to become tighter. The frequency at which the string vibrates would also increase, resulting in a higher pitch when plucked.


What Is the classification for an instrument that produces sound by vibrating a string or strings stretched between two point?

That would be a stringed instrument.


Is a pitch pipe tuner the same as a chromatic tuner?

No, a pitch pipe just plays the pitch and you match the string to it. For a chromatic, you play the string, and it tells you if its to high or to low. I would recommend a chromatic, especially if you are a beginner.