The tools you will need to install the JennAir Convection OvertheRange Microwave oven are; screwdriver drill bits 3/8” or a ½”,Spade or auger bit 1 ½” for cord to pass through the wall, a four foot ladder, and a 2 foot level.
The tools you will need to install the JennAir Convection OvertheRange Microwave oven are; screwdriver drill bits 3/8�? or a ½�?,Spade or auger bit 1 ½�? for cord to pass through the wall, a four foot ladder, and a 2 foot level.
Depending on where you'd like to install it, it could require no tools or many. If you decide to leave it on the countertop, nothing is needed. If you want to install it in say a cabinet space, you'll probably need to use some saws.
There are a few tools needed to install windows. The basic tools you wil need are a power drill, caulk gun, utility knife and a hammer. Your job may involve more tools depending on what all needs to be done exactly.
Measuring Tape, Wrench, Power/Hammer drill with wood drill/stone bits, Ladders(depending upon the height you need to install) are the tools you need to install a retractable awning.
Yes, you need the proper tools and labor to install it.
The tools needed to install a wall mount pot rack will depend on the manufacturer and their instructions. Generally, a screwdriver or hammer would be the only tools you'd need to have on hand.
Yes, you will need a conduit connector and wire connectors to install the KitchenAid Architect II Microwave oven.
No, you shouldn't require any tools to install a memory upgrade for your computer.
Crew driver and a drill.
pencil,power screwdriver,stepladder and a second person if you need help to install miniblinds.
Unless you have experience installing stoves, you should have an electrician install it for you. You will need the proper gas and exhaust lines available before you can install the stove.
Those seeking to install suspension lift kits in their vehicles need the proper tools to do so. These include a car jack, screwdrivers, mallets, wrenches, socket wrenches, power drills, and air tools.
You can't. You need to connect the hardware to install it.