Rubber wire!!!!
If you are speaking of lights using electrical current for power, it would be electrical technology.
Electrical energy.
A typical lamp would convert electrical energy into light energy. And lots of heat too.
Electrical to Mechanical
This is simply called electrical energy.This is simply called electrical energy.This is simply called electrical energy.This is simply called electrical energy.
Thermal
That would be electricity.
If you are speaking of lights using electrical current for power, it would be electrical technology.
electrical resistence is occur in conductor due to over flow of current,in conductorAnswerResistance is not due to the 'flow of current'. It exists whether current is flowing or not! Resistance is determined by the type of material and its physical dimensions. Resistance depends upon the resistivity (which is also affected by temperature) of the material, and the length and cross-sectional area of that material.
A megger is an instrument that generates a high voltage. That high voltage is then used for measuring insulation resistance, especially that of electrical devices.
It is possible. With a battery power source and some kind of heating element that creates electrical resistance in order to transfer that energy into heat; it could be done. I would not recommend that you try.
What kind of microscope has the greatest magnification
People that install cable or other electrical wire would be the kind of workers that use this kind of tool. Utility companies all have these locators to make their job easier.
Electrical energy.
If it has some kind of wireless interface or moving electrical parts, yes it can potentially interfere with wireless signal. But it does happen often.
Ohm's Law states that V = IR (voltage = current times resistance). It can be used to find any of those three quantities if the other two are known. It is one of the most important formulae for calculations in electrical circuits - you will use it all the time.
Ohmmeter.