That depends on the size of the pool and how fast the water is running that is filling it.
see leslie's scale and stain remover
It is necessary to know the length as well as the width and depth of the pool in order to calculate its volume.
It is necessary because the chlorine kills all of the germs that enter the swimming pool.
The question cannot be answered with the information given. It is necessary to know the length and width of the pool as as as whether or not the depth increases steadily.
190ft
Meters.
Emptying a pool is a risky procedure, but must be done in the case of replastering or restoration. The weight of the water stabilizes the structure of the pool against the substrate (soil/gravel). Once you remove the water, you have nothing to stabilize the pool. This is particularly dangerous if the ground is wet, or is flooded by recent rains. In this case, the pool can "float" and cause cracking of the structure. It is likely that your pool shifted a little once the water was out. You need a professional to look over the structure and determine if there are other structural faults or worse--leaks.
There are 22,712.5 liters of water in a pool that is 305 cm by 500 cm and five feet deep. How much water the pool will hold depends on not only the length and width of the pool but also the depth of the pool.
Shocking a pool with products like chlorine can actually lower the pH and alkalinity levels of the pool water temporarily. It is recommended to test the water and adjust the alkalinity levels if necessary after shocking the pool to maintain proper water balance.
A width of a pool is how much feet of water its can provide you with,you just need to know what you are capable of.
After selecting a location for the spa pool, it is necessary to build a base that will be strong enough to support the weight of the pool, water and occupants. It is then necessary to install an electrical connection to the pool. At this point, the pool will need to be filled with water and chemicals must be added until the water is "balanced". There are test strips that can be used to determine the correct chemical levels. http://www.ehow.com/how_4925553_install-spa-pool.html
Depends, What is the length/width and height of it?