The predominate liquid used inside a filament transformer is Mercury. Mercury is used to keep the transformer cool when under heavy use. Mercury is a cheap and long lasting liquid.
9v and 4.25v, measured from a working transformer inside the clock radio.
Moisture entered inside the transformer coil may cause loss of IR value. IR value can be increased by removing the moisture. Keep the transformer in a hot air chamber for sufficient time to vaporize the moisture.
A major cause of decomposition of transformer oil is minor arcing within the transformer. Decomposition results in gas which bubbles towards the top of the transformer and upward into the conservatory tank. Between the transformer and conservator tank is a Buchholz relay, in which this gas collects, causing a mercury switch inside a float to initiate an alarm in the substation. This gas can be collected through a small pipe feeding from the Buchholz relay in order to have it analysed.
Yes, the resistance of the filament of a light bulb is what generates enough heat to make the filament glow and produce light.
yes we can place auto transformer in place of original transformer
In vacuum tube devices, one electrode of the tube (the filament) needs low voltage at relatively high current, while another one (the plate) needs a high voltage at relatively low current. It's hard to build a single power supply to provide both of these, so the filament is usually supplied from its own separate transformer. Nobody has worried about things like this since a short time after transistors came along.
filament
Liquid immersed transformers are typically immersed in what?
the person would probably be crushed inside the transformer
Answer:The filament inside the light bulb reaches over 3000 degree Celsius.
Tungsten
A filament.
The container the transformer core and windings are placed inside is the tank.
the inside of a light bulb is called the filament
Because the filament will burn, and the filament is the part that produces the light.
a filament
2