load in terms of any electrical machine is of 3 types mainly :- 1)resistive load--it means the load connected is a resistor only. 2)inductive load--it means the load applied is an inductor only. 3)capacitive load--it means the load is capacitor only. 4)also there may be combination of all these types or any two of the above loads like capacitive -resistive load;capacitive -inductive load. NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load ---------mrityunjay pandey (kiit university ,btech 2nd year)
A water meter that says no load test means one thing. The thing that it means is iron loss.
In electrical system load means circuit carrying current . Isolator is device which make on ( Connect ) and off ( Disconnect ) of circuit from supply. When load is ON means carrying current and required to disconnect from supply , than is called on load isolation.Here required on load isolator. When load is OFF means not carrying current and required to disconnect from supply , than is called off load isolation.Here required off load isolator. On load isolators design is more precise than off load isolator because while isolating load during ON states create heavy sparking and transient voltage spikes.
it means phrasing the load ha ha ha
LOAD-means to keep an instruction or prog on the memory i.e ram STORE-means to keep the result or instruction or prog to a permanent location for further use load means take a prog to memory. store means save the prog to the parmanent memory
Load rejection occurs when load is suddenly removed from the generator. The most obvious example of this is the breaker connecting the generator to the power grid opens. This results in a full load rejection. Load pick up means the generator is supplying power to a given load. When a generator comes on line, it will pick up some load that might have been supplied by another generator.
The image is of you "taking a load off" of your feet, which are holding you up. If you take a load off your feet, you'd sit down. This is most commonly used as an invitation to sit, as in "Come on in, take a load off."
The word "load" is a noun referring to cargo or a large quantity of anything. The verb load means to pack up or prepare.To use it as a noun, think of it as a thing such as "That was a big load." Load is taking the place of whatever the load was such as a load of wood or a load of cement.Load vs LodeWhile load is cargo or a quantity, the homophone noun "lode" means a deposit of ore, or a similar source of a product. It should only be used in that sense.
when it is under load it means that more and more is being demanded from the engine, be it from speeding up or turning on all auxillaries
It means to put something in another thing you 'load' it
Stress testing means increasing the load ,and cheking the performance at each level. Load testing means at a time giving more load by the expectation and checking the performance at that leval. Volume testing means first we have to apply initial load,then at certain time increase the load and check the performance.
Load Me Up was created in 1999-02.
104 T is the 'Load Index' and 'Speed Rating' on modern tires. The load # 104 means each tire can support 900 Kg and the speed rating 'T' means they are good to use up to 118 mph.
load in terms of any electrical machine is of 3 types mainly :- 1)resistive load--it means the load connected is a resistor only. 2)inductive load--it means the load applied is an inductor only. 3)capacitive load--it means the load is capacitor only. 4)also there may be combination of all these types or any two of the above loads like capacitive -resistive load;capacitive -inductive load. NO LOAD:--- as it is very clear from the word itself that it is no load that means no load has been applied to the machine..i.e.the output terminal of machine is open circuited FULL LOAD:-- the maximum load value that can be applied to the machine at which it can work without damaging any part of the machine is called machine working at full load ---------mrityunjay pandey (kiit university ,btech 2nd year)
That means that the page either cannot load, is taking too long to load, or someone has blocked it.
Load distance is the distance you have to bring your load up an inclined plane.
buckle means bending