Impossible to answer as asked. Serial number should be on the butt. Need to know ALL markings, barrel length, caliber, type of action, finish, etc..
By the serial number and the model number. See the link below.
There isnt a serial number,usually just the model number you see.
You look at the Model number and you can then see the harddrive size for that model number at the PlayStation support network.
They don't have a model number on the putter that I see, I have 35 of them, and 4 like new head covers.
why yes it is Only the Model number CECHF01 is considered by Sony PlayStation Network to be Backwards Compatible. see the related Link
It is located at the back of the PlayStation after the serial Number see related link
Depends on the model but I'm guessing a model 12 since it's the only one that wouldn't have the model right on the receiver and be a pump 22. 1923 - it will be date code marked, see related links for details.
Check and see if it has the same model number. If it has the same model number it should fit.
Your serial number indicates that your Springfield model 1873 trap door model rifle was made in the year 1885.I would check to see if you have the next model,which was the model 1884.
The winchester model 62 was made in a total quantity of 410,456.I would check your serial number or model number again to see if you made a mistake in either?
They only made them from 32-35 and they are date code stamped, see related links for information on the Remington Society of America.
Found my own answer: No; While they do share the same first five digits of the part number (these are the only numbers you'll see on model specific diagrams) the second 5 digits of the part number (which are NOT shown on model specific diagrams), are specific for each model, and are not the same between the two.