Want this question answered?
all the bulbs must in parallel because all must get the same voltage.......in parallel voltage is constant.if they are connected in series they will not get same voltage
All ps3 models except the 20 GB can get connected using the same methods. The 20 GB model does not have WiFi and must use an Ethernet cable
On the CT there will be a white dot that represents a polarity mark. This is used to connect to the correct polarity terminal on the device that the CT is connected to. Additional CT transformers must be connected to the recording or monitoring device using the same polarity as the first CT.
Primary key
In order to test the fuel pump relay, you must check that the two control circuit terminals on the relay are not connected, using an ohmmeter. You must also test the power circuit terminals on the relay, in the same way.
Never say never again. I don't like to use "never" and "always" in the same sentence.
data type and field name
The difference is a sensor network may be connected using wires or wirelessly, a wireless sensor network is always connected wirelessly.
All the coils are the same, each one must be connected to the connector for the cylinder the coil is connected to the spark plug for
before two alternators can be connected in parallel, the output voltage of the two machines should be the same, the phase rotation of the machines must be the same, and the output voltages of the two machines must be in phase.
continue your work . a racer must continue .
To be a Series circiut the electricity MUST flow THROUGH one load to the next."added"