The upstroke of a two-stroke engine has only one function: compression. The downstroke is where power, then exhaust, then intake occur. This is the greatest animation I've seen for explaining a two-stroke engine: http:/www.animatedengines.com/twostroke.shtml
During the power stroke cycle of an internal combustion engine, the exhaust valve opens. This occurs after the combustion process, allowing the spent gases to exit the combustion chamber. The opening of the exhaust valve is crucial for maintaining engine efficiency and preventing back pressure that could hinder performance.
'a 4 stroke engine cycle' is usually what it is called...
The release of CO2, H2O, and CO occurs during the exhaust stroke of the four-stroke engine cycle. As the burnt fuel-air mixture is pushed out of the cylinder, it combines with oxygen to form these byproducts before being expelled through the exhaust system.
In a typical four-stroke engine, the camshaft completes two revolutions for every one stroke cycle of the piston. This is because the four-stroke cycle consists of intake, compression, power, and exhaust strokes, which require the camshaft to operate the intake and exhaust valves twice during each cycle. Thus, for every complete cycle of the engine, the camshaft turns two full revolutions.
the four stroke engine cycle
The spark plug initiates the combustion reaction during the power stroke of the four-stroke engine cycle. This occurs after the compression stroke, where the air-fuel mixture is compressed, and the spark plug ignites it, causing an explosion that drives the piston down. This process converts the chemical energy of the fuel into mechanical energy.
In a two-stroke engine, two strokes is one cycle. In a four stroke engine, four strokes is one complete cycle. A stroke is a part of a cycle. Remember that the "up" motion and the "down" motion each count as one stroke.
It is called the compression stroke.
A 2 cycle engine's piston cycle twice. One compression stroke and 1 exhaust stroke. A 4 cycle engine cycles four times before its exhaust stroke.
Pollution - 4 stroke has far less unburnt hydrocarbon in the exhaust.
generally speaking if it has valves its a 4 stroke 4 cycle engine......if it doesnt have valves then it is a two stroke 2 cycle...................
If it is a 2-stroke engine, 2-cycle engine oil is added to the gasoline. If the engine is 4-stroke, regular 30W motor oil is used. To tell if your engine is 2-stroke or 4-stroke, look for a spout where oil is poured into the engine. If there is no spout, then the engine is 2-stroke and 2-cycle oil must be added to the gasoline.