A 320 is a skid steer loader and uses bobcat # 7003026 oil kit. Drain and refill is recommended every time the track is removed but listed on the 1000 hour service.
Put a high pressure gauge within the range of circuit pressure in the pump circuit. Lock the final drive sprocket against the frame so that it can't move. Actuate the travel lever and record the reading on the gauge.
Need to specify an actual model. Bobcat has made - and continues to make - several different models of skid steer (and other equipment, such as mini-excavators). Motor displacements will vary between models. The S70 isn't going to have the same motor as a 300 series Bobcat.
Any type of Motor oil
The motor oil capacity of a Bobcat 763 skid steer is four quarts. The Bobcat 763 skid steer hydraulic oil capacity is three gallons.
The rear differential pertains to a motor vehicle and means the differential that is situated in the final drive of the transmission assembly, found in rear-wheel drive vehicles.
The best thing to use is the Bobcat "orange" Hydraulic fluid. Actually you dont use hydraulic fluid in a skid loader you need to use hydrostatic transmission fluid. Drive relief pressures are in excess of 5000 psi, the fluid needs to drive the machine as well as make the lift arm raise up and down. If you cant get the Bobcat stuff than use 10w30 or better MOTOR OIL. Dumping ISO 46 or AW32 can be a very costly mistake.
Tear everthing apart from under the cab........................good luck.
Bobcat Fluid part number 6563328 or 10w-30, 10w-40 Class SE motor oil. Use 5w-30 where temps are below -10F.
An electric motor is an electromechanical energy conversion devicewhereas an electric drive is that which involves control of speed or position of the motor.
drive over what ?
drive usually makes the motor go
motor can be control by using variable frequency drive