5w30
The engine will not run with a failed distributor.
Green
If your car has the 2.5L engine. The EGR valve is located directly under the coolant fill cap & pipe. The EGR has a long metal tube that goes from the EGR valve to the upper intake plenum.
Red, five year, hoat type.
At the engine end of the upper rad hose. when replacing it make sure the spring goes toward the engine. You can check you old one by putting it in a pan of hot water on the stove with a thermometer and watch if it pops open at the correct rated temperature. Might save you some money if it's working properly.
It goes into the reservoir that is on the far driver side under the hood. It is located close to the bottom of the windshield.
22" on both sides front. See related link below for 4 options.
For the 2000 Chrysler Cirrus LXi, the serpentine belt routing for the power steering and alternator follows a specific path. The belt typically goes from the crankshaft pulley, around the alternator, then to the power steering pump, and back to the crankshaft. It's important to ensure proper tension and alignment when replacing the belt to avoid any issues with the power steering or alternator function. Always refer to the vehicle's service manual for the exact routing diagram and specifications.
Dot 3
The spring goes into the engine block.
The spring goes to the engine.
The spring goes into the engine.