Right rear, Left rear, Right front, Left front was the standard procedure.
no
The shop manual makes no mention of special requirements. Just bleed the brakes as you would any other car. In case you don't know how to bleed brakes try this link. http://www.popularmechanics.com/automotive/how_to/4213448.html Hope this helps.
im not sure what correct size wrech you need, but it is a metric size
It should be a 3/8 wrench. Correction 10MM and use a socket
Sounds like master cylinder is low on fluid. Bleed the brakes and make sure its full as you are doing it.
1,4,6,3,2,5
counterclockwise
Brakes are adjusted automatically
Grand - 1990 was released on: USA: 18 January 1990
same as the front brakes they r both disc brakes
The 1990 Grand Am was a popular car. The curb weight of the 1990 Pontiac Grand Am was 2,739 pounds.
The master cylinder is held by 2 bolts. Before you mount the new cylinder bleed it on the bench. After installing it you may have to bleed all of the brakes. GoodluckJoeANSWERunscrew 2 fluid pipes,unscrew 2 bolt where it tied up remove cylinder,install new one put the reservoir,bleed properly