answersLogoWhite
Nissan
Nissan Altima
New Electrical Work
Modification of Old Electrical Work

What other models have a starter that will also work in a 1996 Nissan Altima?

676869

Top Answer
User Avatar
Wiki User
2007-10-11 16:26:19
2007-10-11 16:26:19

The 93-97 altimas use a specific starter for that car. All Automatic transmissions use part# 23300-1E410R and all Manual transmissions use part# 23300-1E400R. There are no other Nissan models that use the same part numbers.

1

Related Questions

User Avatar

One's the 2008 model and the other is the 2009 model duhhh

User Avatar

After some research it is discovered that while some reviews advise to stay away from certain models of Nissan cars such as Nissan Xterra, other reviews show that in the top 10 the Nissan Maxima and Nissan Altima were the top two cars for reliability.

User Avatar

A 2000 Nissan Altima is an interference engine which has very tight tolerance. A slight misalignment can cause the pistons and valves to slam into each other.

User Avatar

Some of the optional features available for the 2003 Nissan Altima include front and rear suspension packages, and a turbocharged engine option. Other 2003 Nissan Altima features are luxury interior upgrades and extended service warranties.

User Avatar

If the dipstick has broken off into the tube on a Nissan Altima, you can remove it using pliers. Other people have had luck using industrial strength vacuums and sucking the broken dipstick up.

User Avatar

You can check junkyards,eBay, and other sources.

User Avatar

cant see bolt on other side off starter, how to replace it ?

User Avatar

The Camshaft sensor is located under the cap and rotor of the distributor. This is a common failure on the 2.4L engine due to oil leakage into the distributor. how is the camshaft sensor replaced on 1995 Nissan altima. what other considerations are there.

User Avatar

1985 - 1988 Nissan Maxima is the only other Nissan model with power window motors that will fit a 1986 300ZX.

User Avatar

it might be behind the catalatic converter. if not there than it might be with the other one

User Avatar

it has two thermostats follow the water hoses one on right side the other is in the front

User Avatar

You might be able to physically install it, but the other components may not be optimal.

User Avatar

Nissan owner's manual recommends dot 3 brake fluid. OEM or any other quality brand works.

User Avatar

wich one it has two one on the manifold and the other one on the exhaust pipe

User Avatar

wich one it has two one on the manifold and the other one on the exhaust pipe

User Avatar

it has three...one up top on the passanger side and 2 below..one is up front in the middle and the other back by transmission..my altima needs all of them replaced!!

User Avatar

http://www.nissanclub.com/forums/general-nissan-altima-discussion-1993-2001/260207-how-change-headlight-bulb-96-nissan-altima.html Copy and past that into your web browser. Its for a 1996 but it should be close. I know the bulb is different so look up what bulb you will need. Other then that the steps should be really close.

User Avatar

1 at the exhaust manifold the other towards the rear bumper directly under the car about the middle

User Avatar

there are two one on the intake manifold (facing radiator) and the other one on the exhaust pipe underneath the car

User Avatar

Nissan is a piece of CRAP!! I've had soo many problems with my 2006 Altima 2.5s! O2 Sensor,crankshaft,oil and radiator fluid evaporating(no leaks)! Car hestiation,bucking,speed goes down just a mess! Nissan knows that their 2000-2006 was a recall,but the insist on selling and telling people they have good cars or that people are taking care of the car! A friend of mine also has a nissan altima her car stopped on the intersection with her 2yr old in the car.She almost died that day,cars had to jumped over in order to NOT hit them! She has been to Nissan several time abt this problem! I tell everyone DO NOT buy a nissan altima or any other car from the Dishonest Company! GoodLuck hun...I wish I could sue their A****!

User Avatar

disconnect neg.cable,then disconnect pos. cable from starter ,then other wire,then remove 2 bolts holding starter to engine.

User Avatar

Call your local parts store and they will give you several options that will fit. I do not recommend less than a 7 year rating.

User Avatar

Purchase a repair manual at most parts stores, ( around $12 ) for detailed instructions on this and many other repairs.

User Avatar

If the vehicle is stuck in a gear then the shift censor is out. The other reason could be that the linkage on the transmission is broken.


Copyright © 2020 Multiply Media, LLC. All Rights Reserved. The material on this site can not be reproduced, distributed, transmitted, cached or otherwise used, except with prior written permission of Multiply.