voltage, current and power factor
To select the right compact fluorescent dimmable bulb, factors to consider are bulb design, light output & power consumption, color, and recycling options. It is important to use good judgement regarding these factors and how you plan to use the lamp in question.
Actually in networks we will consider the elements like resistance, inductance, capacitance as lumped elements for simplicity, like this in power systems we will consider the transmission line parameters(resistance, inductance, capacitance) as lumped elements, because we will calculate all the parameters of power systems with respect to receiving end or sending end but not with respect to middle of the line. If a fault occurs on transmission line then we should not consider the lumped elements of that total transmission line, we should consider the lumped elements from sending end to the point where the fault is occurred.
It's there intestines, consider deveining before preparing for consumption...
Consider it as cylinder..
Someone looking to purchase fluorescent bulbs online can find them at sites such as eBay, Amazon or even a Home Depot. Another place that one can consider locally would be a place like Walmart or Target, if these stores are available in our area.
IT CAN BE CALCULATED THEORETICALLY & PRACTICALLY:- 1. theoretically--- For this you must know the SFC(specific fuel consumption) of the engine at the given load. for example(let us consider a diesel generator of 20 kw having SFC as 232 gm/kw-hr at 75% load) (20x0.75)x232 therefore Fuel consumption in ltrs/hr= =4.094ltr/hr 0.85x1000 here 0.75 is for 75% load 0.85 is density of diesel 1000 is factor to convert milli-litre into litres
could it calculate by short thumb rule i.e seepage = (0.01xwetted ares (sq.ft))/1.75
The instantaneous power consumption will be the same at any temperature, but the overall power consumption will be greater at higher temperatures, since the unit will run more often. This is a consumer answer, not a scientific answer. Scientifically, you would have to consider the coolant pressures and wire resistance at each temperature. Your electric bill will not see these differences.
generally speaking, fuel consumption is higher in low gears because the rpm of the engine is higher. Performance is measured in kilometers/gallon. You have to consider that cars are designed for optimum performance when you drive at around 80 km/hr. For each car there is an optimum ratio distance/fuel consumption.
You need food to live, and unless you can afford to eat out every single meal, you will have to store food in your home for daily consumption.
That depends, based on what do you want to calculate it. - One thing to consider is that the voltage is the same in all branches.
add up, total, reckon, calculate, compute, tally, number consider, judge, regard, deem, rate