Usually you have replace the ignition key cylinder.
Installing unexposed wheel locks onto a car with exposed wheel locks should not be problem as long as the installed part has the same thread and is also the same size.
No, the wheel bearing is part of the steering knuckle generally
Ahoy, this is stonemkr and this ring is the contact. the part in side the steering wheel is called the horn ring the part you actually press on steering wheel is called horn button
The steering column is the part the steering wheel sits on.
Local car part stores have a tool called the steering wheel puller, that has to be used to remove the steering wheel. This is used to remove the steering wheel by applying pressure to the middle and pulling up on the rest of the steering wheel to remove it.
the fuse box is below the steering wheel on the lower part of the dash console. It is 2 twist locks there that's how you un lock it.
The steering column is the part the steering wheel is mounted on.
part of the car that is above the steering wheel
you need to buy a steering wheel. {Cheap at auto part store} remove your horn cover screws from behind the steering wheel. attach the pully, screw it in and it will pull the wheel off.
To remove a steering wheel, a person will need a steering wheel puller from an auto part store, from there after the airbag is removed, place the tool over the steering wheel and follow its directions. It will pull the steering wheel off by applying pressure to the middle and pulling everything else up.
If you say so.
no