if the caliper has been replaced there are two copper gaskets that go between the brake hose and the caliper
Decent job -everything done which needs doing -about £430.
If you are looking for an auto repair shop that offers the best brake job because your son needs the brakes in his car replaced, then you should check out Auto Repair.
You don't REPAIR a head gasket. You replace it. This is a fairly complicated task and unless you have some mechanical experience, I suggest you have a qualified person do the job. One job that the part costs only a few dollars. Look at a repair manual. It will give you a idea of the scope of the job.
The gasket alone is actually a very inexpensive part (approximately $10-30), however the job itself is labor intensive - expect to spend $1-2k, depending upon whether the gasket replacement is preventative maintenance or a repair.
You should not unless it is part of your job description. If it is part of your job description, you are required to perform CPR if someone needs it.
Midas and Pro Muffler and Brake Shop are both great places to get your brake auto repair done. They will not make you get more repairs than you need and can do a fast job. It would be cheaper though, if you could do the repair yourself as it is not an expensive part or a difficult task.
See related link, nothing special about the rotor when you get to that part of the brake job, just slide the old ones off and slide the new ones on (see detailed description of brake job with pictures in link). This is a very easy job to do yourself.
Yes if you use the correct gasket material for the job.
No, a disc brake repair job won't be anymore expensive than traditional brake jobs. If you have performance brakes or an ABS system, that would probably be the most expensive brake job.
If it's a job which requires a CDL, then you cannot have the "no air brake" restriction. There is no such thing as an "air brake license" in the US.
Assignment is defined as a piece of work that is assigned to a person as part of their job. The task usually needs to be done on a regular basis for a job.
sounds like the brake light switch needs replacing.the switch is on the brake pedal under the dash. easy job and parts are not expensive