0
There is only one place on an airsoft gun meant to take a fuse. If you open your battery compartment and pull the wires out you should see a plastic case on the red wire. Just snap this case open and you will see the fuse housed between two female connectors. If you had a soldering iron you could always cut the red wire and put two new female connectors to house a new fuse but this would be pointless.
What else can I help you with?
Why the fuse is placed in live wire only?
So that the live wire is isolated when the fuse blows. If a fuse was placed in the neutral, the equipment would still be live when the fuse blows.
Where the fuse is connected in the circuit?
the fuse is placed in series with the device
What amp fuse is in a JG M5-S6 airsoft gun?
most airsoft guns use 20 amp fuses, you can get them at just about any auto parts store or online.
What does a fuse do in an airsoft gun?
The fuse regulates the power that is sent from the battery to the motor and if there is a surge in power then the fuse will blow and save your motor. This is usually caused by a battery with weak charge or one that has been overcharged.
What does possible's slow fuse mean?
slow fuse
Where is a spare fuse location that works only with the ignition on for a aftermarket seat heater for a 2006 dodge sprinter?
It could be anywhere. The installer of the seat heat would have placed the fuse where ever they thought best or easiest.It could be anywhere. The installer of the seat heat would have placed the fuse where ever they thought best or easiest.
What wire is the fuse always placed in?
The fuse is always placed in the hot wire (usually black in color) in a circuit. This is to protect the circuit from excessive current flow, which could lead to overheating and potentially cause a fire. Placing the fuse in the hot wire allows it to interrupt the circuit in case of a fault.
How do you change the digital speedometer on a 1998 Chevy lumina from kilometer to miles?
It is a fuse that has been placed in fuse slot 25 in fuse box on the passenger side. Remove this 10 amp fuse and it will return to MPH. Whitesides
What is the main purpose of a laser printer charge corona?
When an electrical charge is placed on the drum repels the toner particles that have the same charge. The laser then discharges the drum in specific places, causing toner to stick just to the discharged places on the drum. The toner is then transferred to the paper and the paper is heated to fuse the toner to the paper.
Are air soft grenades reusable?
No because they have run out of fuse or power. However, ther are some highly expensive airsoft grenades that cost like $250 and are reusable.
Can you use a 35 amp fuse to replace a 25 amp fuse on an airsoft gun?
It is not a good policy to over fuse devices. When a manufacturer develops a product it has to go to an underwriters testing division where they self destruct the equipment. It is during this test phase where the safety section determine what it should safely be fused at. By over fusing the equipment by 10 more amps that the equipment was designed to handle is taking the risk of destroying the equipment should a fault current appear. Keep safe and don't do it.
Mazda 3 Fuse Box diagram?
You can find it inside of Fuse Box. The sheme is printed in down side of remouval cap. The Fuse Box is placed in driver side part of underhood spase.
