0
What else can I help you with?
How is an internal optical drive connected to the power supply?
the optical drive will connect to the power supply with a connector called molex connecter it is a 4 prong connector
What type of power supply connector is used to supply power to the floppy drive light remains lit constantly How should the technician attempt to repair the problem?
The drive appears to be a bad one. Why do you need a floppy disc drive anyways?
Which connections should be provided to a floppy disk drive during installation?
Connecting a floppy Drive in a Desktop ComputerYou should connect the 4-Pin 12 Volt non-molex Connector from the power supply to the power input of the Floppy Disk Drive, also the IDE ribbon cable from the FDD output on the Main-board to the FDD input on the Floppy Disk Drive, with the pink stripe on the outside of the FDD Input & Output sockets, it is important to make sure you are grounded to the case whilst doing this with the PC Power Cord plugged in but switched off
Where can you buy a Nintendo Wi-Fi Connecter?
I would try Best Buy or one of the office supply stores
What is standard earthing of electrical equipment?
i have a question? in the earthing system should we connect the negative pole of supply to the earth for example a +24 power supply?
How do you change a computer power supply?
Its simple, if you look on back of computer tower near top there is a fan that is your power supply module. You need to remove the cover on the entire tower to gain access usually 4 to 8 screws and two plug and play type connecters, simply swap in the new one screw back in connect plug ins and your all done.
How do you connect a dishwasher to the water supply - do you connect it to hot or cold water?
To connect a dishwasher to the water supply, you typically connect it to the hot water supply. This is because hot water helps to clean dishes more effectively than cold water.
Why do you think external floppy drives cost more?
As compared to an internal floppy drive? You have to include a case, power supply and USB software in order to make them work.
What will happen if you plug in a floppy drive backwards?
Almost all computer connections are keyed. It is difficult to connect backwards. Connecting a data cable backward is not a concern, you can simply connect it correctly without damage. Forcing a power connection in backwards can destroy either (or both) the HD or the power supply. Make sure the power is off before connecting power.
Where does the red wire in a baseboard heater connect to the black or white wire in the wall?
In the heater you will have two wires. You should then have 2 supply wires from the panel, and 2 wires from the thermostat. The neutral (white) supply wire should go to one of the wires on the heater. The hot (black) supply wire should connect to one wire from the thermostat. The other wire from the thermostat will connect to the other wire from the heater.
Should I connect my dishwasher to the hot water or cold water supply for optimal performance and efficiency during the hook up process?
You should connect your dishwasher to the hot water supply for optimal performance and efficiency. This helps the dishwasher clean dishes better and use less energy during the washing cycle.
How do you install window vista basic on Acer aspire m1640 model?
Download the SATA drivers from the Acer website. Extract the files onto a FLOPPY DISKETTE Open the acer and connect a floppy drive to the motherboard and the power supply (Fortunatly Acer have still left these connectors available) Start to install the Vista on the Acer. When it requires a driver for the CD/DVD player, go and look on the floppy disk. All should then be fine
