well, it depends on what you are working with that involves static. For static electricity to form, there needs to be a circuit completed in some fashion, weather that be between 2 objects or between something and you, and you would need a way to prevent that current from traveling too you, thus, you must ground yourself. You can in effect ground yourself by touching something that does not conduct electricity. If your working with an already completed circuit, then just treat it as you would any electricity.
If you like to experiment with electricity, you must do it wearing rubber footwear or standing on a wooden plank since these materials do not conduct electricity. <><><> Electronic devices must be protected from static electricity.
1. Remove static electricity generation sources (tape, paper, etc.) Wear clothing that minimizes the generation of static electricity. 2. Maintain a relative humidity level that is high enough to inhibit, or at least reduce, the generation of static electricity. 3. Properly bond/ground you, workspace and equipment keeping ESD and personnel safety in mind.
precautions taken for cloudburst
precautions to be be taken for animal attacks
Static electricity has the potential (no pun intended!) to destroy semiconductors. When handling semiconductors, proper precautions need to be taken. There are wrist ground straps, shoe coverings, non-conductive sheets and bags and many other objects for protecting these devices. One of the best ways to reduce and/or eliminate static electricity is to raise the indoor humidity to between 40% and 50%. You should also wear cotton clothing and leather shoes. Dry clothing using Fabric softener sheets and use them to rub the furniture. Use a balanced polarity ionizer fan to help balance the charge in the air.
Precautions can be taken out earthquake nowadays include organizing an earthquake emergency kit.
precautions to be taken before is to store water
There are no special precautions for immobilization.
Is this homework
precaution to be taken by a banker
When working on charging systems, allot the following precautions should be taken , expect
Keep equipment dry.