0
What prevents the motherboard from touching the bottom of the case?
Wiki User
∙ 10y ago
spacers on older models...screws on newer
Wiki User
∙ 13y ago
Wiki User
∙ 10y agostandoffs
Add your answer:
Earn +20 pts
What is used to mount the motherboard and to prevent it from touching he metal portions of the case?
Preventing the motherboard from touching the case are stand-offs.
What is the purpose of installing standoffs or spacers between the motherboard and case?
To Prevent components on the back of the motherboard from touching the case.
What is the purpose of spacers?
To Prevent components on the back of the motherboard from touching the case.
What does a riser board do inside a computer?
If I'm not mistaken they raise the motherboard up so it is not touching the case.
What is the purpose of the raised screw holes or standoff installed between the motherboard and the case?
The standoffs create a space between the case and the motherboard, so preventing shorting of components. The space also aids cooling air flow through the space.
How do you keep a motherboard from touching the base of the metal case?
Usually, when you buy a computer case it comes with standoffs which get screwed on to the case (there's usually at least 6 and as many as 10) and then the motherboard sits on those standoffs instead of on to the case itself. The motherboard standoffs serve the purpose of avoiding direct contact between the motherboard and the case itself so as to avoid a possible electrical discharge which would in turn damage the motherboard. There are holes on the case where the standoffs should be placed.
What is the purpose of raised screw holes or stand-offs installed between the motherboard and the case?
Standoffs help to keep the motherboard from touching the case. If that were to happen, that could cause an electrical short and possibly damage the motherboard. Standoffs can also allow for air flow under the motherboard. Another thing of note is that they raise the board to the proper height so the peripheral cards and any connections on the back are in their proper places.
Box like case that contains the electronic components of the computer?
Computer case.
Why is it important that your case and motherboard share a form factor?
assures that the mother board fits in the case. Holes in case align with ports coming off the motherboard. The holes holes in the motherboard align with the holes in the case for anchoring the board to the case.
Where is the Power of the Computer?
It is from power supply It is the cube with many holes for the wire It is located in the bottom left of the computer case probably under the motherboard and the video card
How do you clean ram?
You can blow it with compressed air while it's in the motherboard. You can use a pencil eraser to clean the contacts if you take it out. Be careful, RAM is sensitive to static electricity. You can ground yourself by touching a part of the metal case of the computer before touching any component of the motherboard. You should never touch the contacts with your hands as the oil on them will contaminate it. You should ground yourself before putting the RAM back in.
What is a standoff?
A round plastic or metal peg that is used to separate the motherboard from the case, so that components on the back of the motherboard do not touch the case.
