0
What else can I help you with?
What is the difference between a hand hammered snare drum and a smooth finish snare drum?
A metal snare drum is generally constructed of a rolled piece of steel, aluminum, brass or bronze and welded at the seam. The manufacturer may also add indentations in the material to strengthen the shell and for aesthetic purposes. The main difference between a smooth and hammered shell is before the material is cut, rolled into shape and welded, the material is 'hammered'. This process is usually accomplished by use of an industrial hammering process that adds the distinctive look of hammered metal. The hammering process does affect the tone, or sound, of the drum. Usually the hammering process causes the drum to produce a 'dry', or less brittle tone. Just as cymbals are hammered into shape and hammered by hand or machine in order to produce certain tones, the hammered shelled drum will produce a distinctive tone when compared with non-hammered shelled drums. Many would describe a hammered shelled snare drum as having a 'warmer tone'. Many manufacturer's claim that the hammering process lowers the fundamental tone of the metal shell, moving the the tone closer to the tone of a wood shell drum.
How can I tune my drum set effectively?
To tune your drum set effectively, start by tightening the tension rods evenly around the drum. Use a drum key to adjust the tension until the drum produces a clear and consistent pitch. Tap the drum near each tension rod to check for evenness in tone. Repeat the process for each drum in your set, making sure to tune them to the desired pitch.
What is a bearing edge on drum shell?
It is the surface of the drum shell that actually touches the drum head. The area of this surface is less than that of a cross-section of the whole shell, since it is created by making an angled cut into the shell around the rim. The thickness or thinness of the bearing edge affects the tone of the drum; finer or sharper bearing edges yield a brighter tone, while thicker bearing edges yield a warmer tone. If the bearing edge is not perfectly level and perpendicular to the cylinder of the shell, the drum head will not seat properly and the tone of the drum will suffer.
How do you tune a drum set effectively?
To tune a drum set effectively, start by tightening the tension rods evenly around the drum. Use a drum key to adjust the tension until the drum produces a clear and consistent tone. Tap the drum in different spots to check for any inconsistencies in pitch, and make further adjustments as needed. Repeat this process for each drum in the set to ensure they are all in tune with each other.
What are timbals?
they are basically like the kettle drum or timpani. the tone and pitch to the drum itself can be lowered or tightened by a foot pedal, much like kick drum pedal to your average drum set.
What is the mood and tone of drum girls and dangerous pie?
Depressing and happy
What is a bass drum woofer?
They add a low subsonic fundamental to the usable tone of the drum. They also allow the main bass drum to be tuned completely separate allowing differing combinations in tone to be captured. For instance, a bass drum with a lot of attack and a lot of bottom end at the same time.
What is the proper technique for tuning a floor tom drum?
To properly tune a floor tom drum, start by tightening the tension rods evenly around the drum. Use a drum key to adjust the tension until the drum produces a clear and resonant sound. Make sure the tension is consistent across all rods to maintain a balanced tone. Experiment with different tensions to find the desired pitch and tone for the drum.
Can you explain how drum notes are produced and how they contribute to the overall sound of a drum performance?
Drum notes are produced when a drummer strikes the drumhead with a drumstick or mallet. The vibration of the drumhead creates sound waves that travel through the air, producing the distinctive tone of the drum. The pitch and tone of the drum notes can be adjusted by tightening or loosening the drumhead. In a drum performance, the combination of different drum notes creates rhythms and patterns that contribute to the overall sound and feel of the music.
What has the author H Hands written?
H. Hands has written: 'For the man in the jungle' 'An appreciation' 'Process in India' 'Half-tone direct from original negatives' 'The best printing process for small workers' 'Oil lamps as an aid to exposure'
What are the Thailand musical instrument?
Sor-u , Tone Drum , Krachap Pi , Kokg Song Na (two drum faces) and so on........
Why does the steel drum belongs to the percussion family?
A percussion instrument is any instrument in which the sound is achieved by a striking action (thus the name 'percussion'). The steel drum is struck with rubber mallets to produce the tone, and different spots in a drum correspond to different notes. The bigger the spot, the lower the tone.
