15 amps 120 volts AC
10 SEER
line choke rating for 35kw drive
you need the current of motor or the KW/HP rating
ac motor
15 amps 120 volts AC
15 amps 120 volts AC
1 ton ac amp
Sir, The rating of ac generator is always calculated in KVA.So rating of generator as asked in your question is 360 KVA Sir, The rating of ac generator is always calculated in KVA.So rating of generator as asked in your question is 360 KVA
The SEER rating on a York AC unit model TCGD 36S21S1s is a 13. The SEER rating stands for the seasonal energy efficiency ratio. The SEER ratio is something a person should look for when looking at AC units to purchase.
14, installed in 2009
10 SEER
What size is the AC? Look at the power consumption rating of the AC unit; if it pulls anything close to 15 amps, a new breaker will not solve your problem. There should be an information panel that shows the current draw of the AC. If the AC pulls more than the breaker can handle, you need to re-wire the outlet for the AC. You can't safely just replace the breaker with a larger one since that would result in a fire hazard.
Star Delta starters are used for AC motors with higher rating (generally more than 11 KW) and with high initial torque load.
On the side of the relay there is a name plate that tells you the current carrying capacity of the contacts. It gives you the ratings at different AC voltages and a DC rating of the contacts at different voltages.
the (mcb) is miniature circuit breaker SPN is Single Pole w/neutral DP is double pole TPN is tripple pole w/neutral)MCB =Miniature circuit breaker b)SPN=Single pole and neutral ( 1 terminal for live and 1 terminal for Neutral cable for wire connection. Pole refers to a power cable connection on the MCB) c)TPN=Triple Pole & Neutral (ie. altogether 4 cable input and 4 cable out from the MCB) d) DP refers to Double Pole (with no specific neutral terminal.Still one pole may be used for that. The A refers to rated Current in amperes. Also important is ( i) the rated voltages which will govern the given in Amperes.(ii) Duty it is meant for eg. lighting , motor power etc. (Motor duty for eg is A3). Also whether AC or C supply.
if it matches the current rating.... then no problem.