Usually a mirror.
A mirror on a compound light microscope reflects light from an external source, such as a lamp or sunlight, onto the specimen being observed. This helps to illuminate the specimen and improve visibility for better observation and analysis under the microscope.
After leaving the condenser in a compound light microscope, light passes through the specimen on the slide.
A photograph of a specimen taken through a compound light microscope is called a photomicrograph.
it is the mirror located just below the stage. it then reflects the light towards the condenser and to the slide.
The another name for a compound microscope is a light microscope, as it uses light to illuminate the specimen being observed.
The objective lens captures the light from the specimen in a compound microscope. This lens gathers and magnifies the light to provide a detailed image of the specimen.
To create contrast when using a compound light microscope, you can adjust the microscope's condenser to control the amount of light reaching the specimen. Additionally, you can use stains or dyes on the specimen to enhance contrast by highlighting specific features.
The mirror or a light source reflects the light onto the specimen placed on the stage of a microscope. The objective lens then focuses this light on the specimen, allowing for magnification and visualization.
A compound light microscope is named for the use of more than one lens to collect and focus light, and magnify the image.
It sounds like you are describing a compound light microscope. This type of microscope uses lenses in the tube to magnify the image, a stage to hold the specimen, and a light source to illuminate the specimen for viewing. It is commonly used in laboratories for observing microscopic specimens.
A light microscope is called a compound microscope because it uses multiple lenses (a compound of lenses) to magnify the image of a specimen. This allows for higher magnification and resolution compared to a simple microscope.
Photomicrograph